As filed with the U.S. Securities and Exchange Commission on April 19, 2021.

Registration No. 333-254863

UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

Washington, D.C. 20549

Amendment No. 1

FORM S-1

REGISTRATION STATEMENT

Under

The Securities Act of 1933

TREACE MEDICAL CONCEPTS, INC.

(Exact name of registrant as specified in its charter)

203 Fort Wade Rd., Suite 150

Ponte Vedra, Florida 32081

(904) 373-5940

(Address, including zip code, and telephone number, including area code, of registrant’s principal executive offices)

John T. Treace

Chief Executive Officer

203 Fort Wade Rd., Suite 150

Ponte Vedra, Florida 32081

(904) 373-5940

(Name, address, including zip code, and telephone number, including area code, of agent for service)

Copies to:

Approximate date of commencement of proposed sale to the public: As soon as practicable after the effective date of this Registration Statement.

If any of the securities being registered on this Form are to be offered on a delayed or continuous basis pursuant to Rule 415 under the Securities Act of 1933, check the following box.  ☐

If this Form is filed to register additional securities for an offering pursuant to Rule 462(b) under the Securities Act, please check the following box and list the Securities Act registration statement number of the earlier effective registration statement for the same offering.  ☐

If this Form is a post-effective amendment filed pursuant to Rule 462(c) under the Securities Act, check the following box and list the Securities Act registration statement number of the earlier effective registration statement for the same offering.  ☐

If this Form is a post-effective amendment filed pursuant to Rule 462(d) under the Securities Act, check the following box and list the Securities Act registration statement number of the earlier effective registration statement for the same offering.  ☐

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, smaller reporting company, or an emerging growth company. See the definitions of “large accelerated filer,” “accelerated filer”, “smaller reporting company”, and “emerging growth company” in Rule 12b-2 of the Exchange Act. (Check one):

Emerging growth company  ☑

If an emerging growth company, indicate by check mark if the registrant has elected not to use the extended transition period for complying with any new or revised financial accounting standards provided under Section 7(a)(2)(B) of the Securities Act.  ☐

CALCULATION OF REGISTRATION FEE

The Registrant hereby amends this Registration Statement on such date or dates as may be necessary to delay its effective date until the Registrant shall file a further amendment which specifically states that this Registration Statement shall thereafter become effective in accordance with Section 8(a) of the Securities Act of 1933 or until the Registration Statement shall become effective on such date as the Commission, acting pursuant to said Section 8(a), may determine.

The information in this preliminary prospectus is not complete and may be changed. We may not sell these securities until the registration statement filed with the Securities and Exchange Commission is declared effective. This preliminary prospectus is not an offer to sell these securities and it is not soliciting an offer to buy these securities in any state where the offer or sale is not permitted.

SUBJECT TO COMPLETION, DATED APRIL 19, 2021

9,375,000 Shares

Common Stock

This is an initial public offering of shares of common stock by Treace Medical Concepts, Inc. We are offering 6,250,000 shares of our common stock to be sold in the offering. The selling stockholders identified in this prospectus are offering an additional 3,125,000 shares of our common stock. We will not receive any proceeds from the sale of the shares by the selling stockholders. The initial public offering price is expected to be between $15.00 and $17.00 per share.

Prior to this offering, there has been no public market for our common stock. We have applied to list our common stock on the Nasdaq Global Market under the symbol “TMCI.”

We are an “emerging growth company” and a “smaller reporting company” as defined under the federal securities laws and, as such, have elected to comply with certain reduced requirements.

Investing in our common stock involves a high degree of risk. See “Risk Factors” beginning on page 16.

We and the selling stockholders have granted the underwriters an option exercisable for 30 days after the date of this prospectus, to purchase, from time to time, in whole or in part, up to an aggregate of 1,406,250 shares, which is comprised of 703,125 shares from us and 703,125 shares from the selling stockholders, at the public offering price less underwriting discounts and commissions.

The underwriters expect to deliver the shares to purchasers on or about                    , 2021.

Neither the Securities and Exchange Commission nor any state securities commission has approved or disapproved of these securities or determined if this prospectus is truthful or complete. Any representation to the contrary is a criminal offense.

                    , 2021

TABLE OF CONTENTS

Through and including                 , 2021 (the 25th day after the date of this prospectus), all dealers effecting transactions in these securities, whether or not participating in this offering, may be required to deliver a prospectus. This is in addition to a dealer’s obligation to deliver a prospectus when acting as an underwriter and with respect to an unsold allotment or subscription.

We and the selling stockholders have not authorized anyone to provide any information or to make any representations other than those contained in this prospectus or in any free writing prospectuses we have prepared. We and the selling stockholders take no responsibility for, and can provide no assurance as to the reliability of, any other information that others may give you. This prospectus is an offer to sell only the securities offered hereby, but only under circumstances and in jurisdictions where it is lawful to do so. The information contained in this prospectus is accurate only as of the date.

For investors outside of the United States: we have not and the underwriters have not done anything that would permit this offering or possession or distribution of this prospectus in any jurisdiction where action for that purpose is required, other than the United States. Persons outside of the United States who come into possession of this prospectus must inform themselves about, and observe any restrictions relating to, the offering of the shares of common stock and the distribution of this prospectus outside of the United States.

i

1

2

3

4

5

6

The following table illustrates our patented Lapiplasty System, with procedural instrumentation and implants used in each step of our proprietary Lapiplasty Procedure:

 

Lapiplasty System
Correct.   Make the correction before the cut   Using the Lapiplasty Positioner, the entire metatarsal bone is returned to normal 3D alignment.
Cut.   Perform precision cuts with confidence   Using the Lapiplasty Cut Guide, the unstable joint surfaces are cut in the corrected position.
Compress.   Achieve controlled compression of joint surfaces   Using the Lapiplasty Compressor, the two bone surfaces are brought together while 3D correction is maintained.
Fixate.   Apply biplanar fixation for robust stability   Using Biplanar Plating, two titanium plates are fastened at ninety degree angles and the joint is secured and stabilized. This process is designed to allow for early return to weight-bearing in a post-operative boot while the bones fuse together.

Expanding our Lapiplasty offerings, we recently launched the Lapiplasty Mini-Incision System, which is designed to allow the Lapiplasty Procedure to be performed through a miniature, 3.5cm incision as compared to the current 6cm to 8cm incision. We believe the Lapiplasty Mini-Incision System offers an attractive option for patients and surgeons.

We have also commercialized products to address ancillary surgical procedures performed routinely within a Lapiplasty surgical case. Providing these ancillary products allows us to capture a higher percentage of the

7

8

9

10

11

12

13

14

15

RISK FACTORS

Investing in our common stock involves a high degree of risk. You should consider carefully the risks and uncertainties described below, together with all of the other information in this prospectus, including the section titled “Management’s Discussion and Analysis of Financial Condition and Results of Operations” and our financial statements and related notes thereto included elsewhere in this prospectus, before deciding whether to invest in shares of our common stock. The risks described below are not the only ones facing us. The occurrence of any of the following risks or additional risks and uncertainties not presently known to us or that we currently believe to be immaterial could materially and adversely affect our business, financial condition, results of operations and future prospects. In that event, the market price of our common stock could decline, and you could lose all or part of your investment. Please also see the sections titled “Special Note Regarding Forward-Looking Statements” and “Market, Industry and Other Data.”

Risks Related to Our Financial Condition and Capital Requirements

We have incurred losses in the past and may be unable to achieve or sustain profitability in the future.

We incurred net losses in each period since we commenced operations. For 2020, we incurred net losses of $3.7 million and as of December 31, 2020, we had an accumulated deficit of $21.4 million and $30.0 million of principal outstanding under our term loan agreement. We expect to continue to incur significant product development, clinical and regulatory, sales and marketing, medical education and other expenses. In addition, we expect that our general and administrative expenses will increase following this offering due to the additional costs associated with being a public company. These efforts and additional expenses may be more costly than we expect, and we cannot guarantee that we will be able to increase our revenue to offset such expenses. Our revenue may decline or our revenue growth may be constrained for a number of reasons, including reduced demand for our products and services, increased competition or if we cannot capitalize on growth opportunities. We will need to generate significant additional revenue to achieve and sustain profitability and, even if we achieve profitability, we cannot be sure that we will remain profitable for any substantial period of time. Our failure to achieve or sustain profitability could negatively impact the value of our common stock.

We have a limited operating history and have grown significantly in a short period of time. If we fail to manage our growth effectively, our business could be materially and adversely affected.

We formed as a medical device consulting business in July 2013, and began focusing on the foot and ankle market in January 2014. Accordingly, we have a limited operating history, which makes it difficult to evaluate our future prospects. Our operating results have fluctuated in the past, and we expect our future quarterly and annual operating results to continue to fluctuate as we focus on increasing the demand for our products and continue to develop clinical evidence to support the safety and efficacy of our Lapiplasty System, as well as develop new product innovations. We may need to make business decisions that could adversely affect our operating results, such as modifications to our pricing strategy, business structure or operations.

In addition, we have experienced recent rapid growth and anticipate further growth. For example, the number of our full-time employees increased from 32 as of December 31, 2017 to 133 as of December 31, 2020. This growth has placed significant demands on our management, financial, operational, technological and other resources, and we expect that our growth will continue to place significant demands on our management and other resources and will require us to continue developing and improving our operational, financial and other internal controls. In particular, continued growth increases the challenges involved in a number of areas, including recruiting and retaining sufficient skilled personnel for our direct sales force, providing adequate training and supervision to maintain our high-quality standards and preserving our culture and values. We may not be able to address these challenges in a cost-effective manner, or at all. To achieve our revenue goals, we must also successfully increase our supply of products from third party manufacturers to meet expected customer demand. In the future, we may experience difficulties with quality control, component supply and shortages of

16

qualified personnel, among other problems. These problems could result in delays in product availability and increases in expenses. Any such delay or increased expense could adversely affect our ability to generate revenue. In addition, rapid and significant growth will place a strain on our administrative and operational infrastructure. In order to manage our operations and growth, we will need to continue to improve our operational and management controls, hiring process, reporting and information technology systems and financial internal control procedures. If we do not effectively manage our growth, we may not be able to execute on our business plan, respond to competitive pressures, take advantage of market opportunities, satisfy customer requirements or maintain high-quality product offerings, which could have a material adverse effect on our business, financial condition and results of operations.

The terms of our credit agreements require us to meet certain operating and financial covenants and place restrictions on our operating and financial flexibility. If we raise additional capital through debt financing, the terms of any new debt could further restrict our ability to operate our business.

Under the terms of our loan agreements discussed in more detail under section titled “Management’s Discussion and Analysis of Financial Condition and Results of Operations—Liquidity and Capital Resources—Short-Term and Long-Term Debt Obligations,” we are subject to certain affirmative and negative covenants, including (but not limited to), financial covenants related to minimum revenue and minimum liquidity, covenants limiting our ability to incur certain additional indebtedness, create certain liens, enter into a change of control transaction and make certain distributions and investments without our lenders’ consent. Our lenders may also declare us in default for certain types of events such as non-payment of debts, inaccurate representations and warranties, failure to comply with terms of material indebtedness and material agreements, bankruptcy and insolvency, a change of control and/or a material adverse change. Upon such events, our lenders could declare an event of default, which would give them the right to declare all borrowings outstanding, together with accrued and unpaid interest and fees, to be immediately due and payable. In addition, our lenders would have the right to proceed against the assets we provided as collateral under the loan agreements. For example, under our loan with Silicon Valley Bank (SVB), SVB would have the right to enforce liens and security interests over substantially all of our assets (excluding intellectual property) in the event of certain specified defaults under the loan with SVB. In addition, for our loan with CR Group LP (CRG), CRG would have the right to enforce liens and security interests in substantially all of our assets (including intellectual property) in the event of certain specified defaults under the loan with CRG, provided that the priority of such liens are subject to an intercreditor agreement between CRG and SVB. If the debt under any of our loan agreements is accelerated, we may not have sufficient cash or be able to sell sufficient assets to repay this debt or may have to curtail our growth plans, which would harm our business and financial condition.

Additional capital, if needed, may not be available on acceptable terms, if at all.

Even if this offering is successful, we may require additional capital to maintain and expand our operations. Our operations are capital-intensive and are expected to increase as we expand our sales force, research and development efforts and product offerings. If we raise additional funds through the issuance of equity, equity-linked or debt securities, those securities may have rights, preferences or privileges senior to those of our common stock, and our existing stockholders may experience dilution. Any debt financing secured by us in the future could require that a substantial portion of our operating cash flow be devoted to the payment of interest and principal on such indebtedness, which may decrease available funds for other business activities, and could involve restrictive covenants relating to our capital-raising activities and other financial and operational matters, which may make it more difficult for us to obtain additional capital and to pursue business opportunities. We cannot be certain that we will be able to obtain additional financing on favorable terms, if at all. If we cannot raise funds on acceptable terms, if and when needed, we may not be able to continue as a going concern or we may not be able to grow our business or respond to competitive pressures or unanticipated requirements, which could seriously harm our business.

17

Risks Related to Our Business and Industry

We operate in a very competitive business environment, and if we are unable to compete successfully against our existing or potential competitors, our business, financial condition and results of operations may be adversely affected.

Our existing products and procedures are, and any new products or procedures we develop and commercialize will be, subject to intense competition. The industry in which we operate is competitive, subject to change and sensitive to the introduction of new products, procedures or other market activities of industry participants. Our ability to compete successfully will depend on our ability to continue to train surgeons on the Lapiplasty Procedure and gain their acceptance of the procedure, develop additional products and procedures to improve Lapiplasty and expand our product offerings that reach the market in a timely manner, receive adequate coverage and reimbursement from third-party payors and provide products that are easier to use, safer, less invasive and more effective than the products and procedures of our competitors.

We compete with large, diversified orthopaedic companies, including Stryker Corporation and its newly acquired Wright Medical Group, Inc. businesses, DePuy Synthes Products, Inc., a Johnson & Johnson subsidiary, Arthrex, Inc. and Smith & Nephew. Other large, diversified orthopaedic companies that may compete with us include Zimmer Biomet Holdings, Inc. and Integra LifeSciences Holdings Corporation. We also compete with smaller orthopaedic companies. We also face potential competition from many different sources, including academic institutions, governmental agencies and public and private research institutions.

At any time, these competitors and other potential market entrants may develop new products, procedures or treatment alternatives that could render our products obsolete or uncompetitive. In addition, one or more of such competitors may gain a market advantage by developing and patenting competitive products, procedures or treatment alternatives earlier than we can, obtaining regulatory clearances or approvals more rapidly than we can or selling competitive products at prices lower than ours. If medical research were to lead to the discovery of alternative therapies or technologies that improve or cure bunions as an alternative to surgery, such as by natural correction of the unstable joint in the middle of the foot, the use of pharmaceuticals or breakthrough bio-technological innovations or therapies, our profitability could suffer through a reduction in sales or a loss in market share to a competitor. The discovery of methods of prevention or the development of other alternatives to the Lapiplasty Procedure could result in decreased demand for our products and, accordingly, could have a material adverse effect on our business, financial condition and results of operations. Many of our current and potential competitors have substantially greater sales and financial resources than we do. These competitors may also have more established distribution networks, a broader offering of products, entrenched relationships with surgeons and distributors or greater experience in launching, marketing, distributing and selling products or treatment alternatives.

We also compete with our competitors to engage the services of independent sales agents, both those presently working with us and those with whom we hope to work with as we expand. In addition, we compete with our competitors in acquiring technologies and technology licenses complementary to our products or procedures or advantageous to our business. If we are unable to compete successfully against our existing or potential competitors, our business, financial condition and results of operations may be adversely affected, and we may not be able to grow at our expected rate, if at all.

If we fail to develop and retain an effective direct sales force, or if we are unable to successfully expand our sales management and sales specialist teams, it could negatively impact our sales, and we may not generate sufficient revenue to sustain profitability.

Our revenue and profitability is directly dependent upon the sales and marketing efforts of our sales management and sales specialist teams. In order to expand our business, we plan to build a substantial direct sales force. We believe it is necessary to utilize sales management and sales specialist teams that have strong sales leadership and technical background specializing in sales and marketing of products for foot and ankle

18

surgery procedures. As we increase our marketing efforts, we will need to retain, develop and grow the number of direct sales personnel that we employ. We intend to make a significant investment in recruiting and training sales representatives and clinical representatives as we expand our business. There is significant competition for sales personnel experienced in relevant medical device sales. Once hired, the training process is lengthy because it requires significant education for new sales representatives and clinical specialists to achieve the level of clinical competency with our products expected by surgeons. Upon completion of the training, our sales representatives typically require lead time in the field to grow their network of accounts and achieve the productivity levels we expect them to reach in any individual territory. Furthermore, the use of our products often requires or benefits from direct support from us, including through our experienced sales representatives that provide assistance in the operating room. Our future success will depend largely on our ability to continue to hire, train, retain and motivate skilled members of our sales management and sales specialist teams with significant technical knowledge in various areas. If we are unable to attract, motivate, develop and retain a sufficient number of qualified sales personnel, and if our sales representatives do not achieve the productivity levels we expect them to reach, our revenue will not grow at the rate we expect and our financial performance will suffer. Also, to the extent we hire personnel from our competitors, we may have to wait until applicable non-competition provisions have expired before deploying such personnel in restricted territories or incur costs to relocate personnel outside of such territories, and we have been in the past, and may be subject to future allegations that these new hires have been improperly solicited, and that they have divulged to us proprietary or other confidential information of their former employers. Additionally, because the market for experienced sales personnel is competitive, our competitors may try to hire our sales personnel away from us. If successful, we would be required to dedicate resources to recruiting, filling and training those vacant positions. We may also be vulnerable to poaching of our sales personnel from our competitors. Any of these risks may adversely affect our business.

We rely in part on independent sales agents to sell our products to our customers, and if we are unable to maintain and expand our network of independent sales agents, we may be unable to generate anticipated sales.

We utilize a hybrid sales team with a mix of employee sales personnel and independent sales agents to sell our products to surgeons, hospitals, clinics and other end users and to assist us in promoting market acceptance of, and creating demand for, our products. If we are unable to come to commercially reasonable terms with a sales agent or agents, we may not generate the expected level of sales and may need to spend more of our capital resources to hire sales personnel as employees. In addition, there is a risk that a sales agent that we contract with will give higher priority to the products of other medical device companies, including products directly competitive with our products or may be required by larger medical devices companies to stop offering our products. Though we have established initiatives to further focus our independent sales channel on our products, these initiatives may not translate to the increase sales or penetration which we expect. There can be no assurance that a sales agent will devote the resources necessary to provide effective sales and promotional support to our products. In addition, if an independent sales agent terminates its relationship with us and is retained by one of our competitors, we may be unable to prevent them from helping competitors solicit business from our existing customers, which could adversely affect our sales. Until we establish a direct sales force sufficient to serve our customers, we will continue to rely on an independent sales force.

Our business plan relies on certain assumptions about the market for our products, however, the size and expected growth of our addressable market has not been established with precision and may be smaller than we estimate, and even if the addressable market is as large as we have estimated, we may not be able to capture additional market share.

Our estimates of the addressable market for our current products and future products are based on a number of internal and third-party estimates and assumptions, including the prevalence of bunion sufferers and the difficulty of persuading bunion suffers to undergo bunion surgery and specifically the Lapiplasty Procedure. While we believe our assumptions and the data underlying our estimates are reasonable, these assumptions and

19

our estimates may not be correct. For example, we believe that the aging of the general population and increasingly active lifestyles will continue and that these trends will increase the need for our products. However, the projected demand for our products could materially differ from actual demand if our assumptions regarding these trends and acceptance of our products by the medical community prove to be incorrect or do not materialize, or if non-surgical treatments or other surgical techniques gain more widespread acceptance as a viable alternative to the Lapiplasty Procedure. In addition, even if the number of bunion sufferers who elect to undergo bunion surgery, and the Lapiplasty Procedure in particular, increases as we expect, technological or medical advances could provide alternatives to address bunion deformities and reduce demand for bunion surgery. As a result, our estimates of the addressable market for our current or future products and procedures may prove to be incorrect. Further, one component of our growth strategy is our direct to patient education program, which we expect will help us educate additional bunion patients about our products and procedures; however, these patient engagements may not be as successful at educating potential surgical candidates as we expect. Thus, even if the total addressable market for our current and future products and procedures is as large as we have estimated, we may not be able to penetrate the existing market to capture additional market share for the reasons discussed in this “Risk Factors” section. If the actual number of bunion sufferers who would benefit from our products, the price at which we can sell future products or the addressable market for our products is smaller than we estimate, or if the total addressable market is as large as we have estimated but we are unable to capture additional market share, it could have a material adverse effect on our business, financial condition and results of operations.

The ongoing global COVID-19 pandemic has adversely affected, and may continue to adversely affect, our business, financial condition and results of operations.

Market factors and disruptions in global markets may also affect our future operating results and cash flows. The COVID-19 pandemic has severely restricted the level of economic activity around the world. On January 30, 2020, the WHO declared the COVID-19 outbreak a Public Health Emergency of International Concern, and on March 13, 2020, the COVID-19 pandemic was declared a national emergency. Almost all U.S. states, including Florida where our headquarters is located, issued, and others in the future may issue, “shelter-in-place” orders, quarantines, executive orders and similar government orders, restrictions and recommendations to control the spread of COVID-19. As a result of those government restrictions, throughout 2020 and, in some cases, extending into 2021, temporary closures of businesses were ordered, numerous other businesses temporarily closed voluntarily and hospitals, ambulatory surgical centers and surgeons were ordered to delay elective surgeries in an attempt to free up medical resources to address the COVID-19 pandemic. While many elective surgery restrictions have been lifted, these and other restrictions may be reinstated in the future.

We have experienced disruptions to our revenue and may experience further business disruptions, including disruptions to our supply chain, independent sales agents, customers, study enrollment timelines and regulatory processes. Further, patients continue to delay or forego bunion surgery procedures to avoid hospitals and ambulatory surgical centers and comply with quarantine and/or similar directives from local and national health and government officials. The delayed or foregone bunion surgeries have had a significant impact on our operations and resulted in a rapid decrease in revenue and cash flows beginning in March 2020, as compared to prior periods and original expectations. Despite some recovery, this reduction in sales, as compared to original expectations, have continued. We expect the negative impacts to continue and may worsen in at least the short-term during the COVID-19 pandemic. While we cannot reasonably estimate the duration or severity of the COVID-19 pandemic, we expect that it will continue to have an adverse impact on our business, results of operations, financial position and liquidity for at least the remainder of 2021. Moreover, the COVID-19 pandemic has contributed to significant volatility in global financial markets, potentially reducing our ability to access capital, which could in the future negatively affect our liquidity.

For additional information regarding the impact of the COVID-19 pandemic on our company, see the section titled “Management’s Discussion and Analysis of Financial Conditions and Results of Operations—Factors Affecting Our Business—Impact of COVID-19 Pandemic.”

20

The seasonality of our business creates variance in our quarterly revenue, which makes it difficult to compare or forecast our financial results.

Our revenue fluctuates on a seasonal basis, which affects the comparability of our results between periods. In particular, we have experienced and expect to continue to experience seasonality in our business, with higher sales volumes in the fourth calendar quarter and lower sales volumes in the first calendar quarter. Our sales volumes in the fourth calendar quarter tend to be higher as many patients elect to have surgery after meeting their annual deductible and having time to recover over the winter holidays. Our sales volumes in the first calendar quarter tend to be lower as a result of adverse weather and by resetting annual patient healthcare insurance plan deductibles, both of which may cause patients to delay elective procedures. The orthopaedic industry traditionally experiences lower sales volumes in the third quarter than throughout the rest of the year as elective procedures generally decline during the summer months. Although we follow orthopaedic industry trends generally, to date our third quarter sales volumes have not been lower than other quarters but we may experience relatively lower sales volumes during third quarters in the future. Medical device companies historically experience a decline in the number of orthopaedic implant surgeries in the summer months, and we may experience similar seasonality in the future. These seasonal variations are difficult to predict accurately, may vary amongst different markets and at times may be entirely unpredictable, which introduce additional risk into our business as we rely upon forecasts of customer demand to build inventory in advance of anticipated sales. In addition, we believe our limited history commercializing our products has, in part, made our seasonal patterns more difficult to discern, making it more difficult to predict future seasonal patterns.

If we cannot innovate at the pace of our competitors, we may not be able to develop or exploit new products or procedures in time to remain competitive.

For us to remain competitive, it is essential to develop and bring to market new products and procedures at an increasing speed. If we are unable to meet customer demands for new products and procedures, or if the products and procedures we introduce are viewed less favorably than our competitors’ products or procedures, our results of operations and future prospects may be negatively affected. To meet our customers’ needs in these areas, we must continuously design new products, update existing products and invest in and develop and enhance our procedures. Our operating results depend to a significant extent on our ability to anticipate and adapt to technological changes in the bunion surgery market, keep pace with developments and innovations by our competitors and maintain a strong product pipeline. Any inability to do so could have a material adverse effect on our business, financial condition and results of operations.

Product liability lawsuits and quality system problems could harm our business.

The manufacture and sale of medical devices exposes us to risk of product liability claims. If any of our products become the subject of a product liability claim, legal defenses are costly, regardless of the outcome. Thus, we may experience increased legal expenses as we defend any such matter, and we could incur liabilities associated with adverse outcomes that exceed our insurance coverage.

Additionally, we could experience a material design or manufacturing failure in our products, a quality system failure, other safety issues or heightened regulatory scrutiny that would warrant a recall of some of our products. Product liability lawsuits and claims, safety alerts and product recalls, regardless of their ultimate outcome, could have a material adverse effect on our business and reputation and on our ability to attract and retain customers.

If the product liability claims brought against us involve uninsured liabilities or result in liabilities that exceed our insurance coverage, our business, financial condition and results of operations could be materially and adversely affected. Further, such product liability matters may negatively impact our ability to obtain insurance coverage or cost-effective insurance coverage in future periods.

21

Industry trends have resulted in increased downward pricing pressure on medical services and products, which may affect our ability to sell our products at prices necessary to support our current business strategy.

The trend toward health care cost containment through aggregating purchasing decisions and industry consolidation, along with the growth of managed care organizations, is placing increased emphasis on the delivery of more cost-effective medical therapies. For example:

More broadly, provisions of the Affordable Care Act (ACA) could meaningfully change the way health care is developed and delivered in the United States, and may adversely affect our business and results of operations. For further discussion of these challenges, see “—Risks Related to Regulatory Matters—Changes in health care policy and regulation may have a material adverse effect on us.” We cannot predict accurately what health care programs and regulations will ultimately be implemented at the federal or state level, or the effect of any future legislation or regulation in the United States or elsewhere. However, any changes that have the effect of reducing reimbursements for our products or reducing medical procedure volumes could have a material and adverse effect on our business, financial condition and results of operations.

In addition, the largest device companies with multiple product franchises have increased their effort to leverage and contract broadly with customers across franchises by providing volume discounts and multi-year arrangements that could prevent our access to these customers or make it difficult, or impossible, to compete on price.

Our employees and independent contractors, including independent sales consultants and any other consultants, any future service providers and other vendors, may engage in misconduct or other improper activities, including noncompliance with regulatory standards and requirements, which could have an adverse effect on our results of operations.

We are exposed to the risk that our employees and independent contractors, including independent sales consultants and any other consultants, any future commercial collaborators, and other vendors may engage in misconduct or other illegal activity. Misconduct by these parties could include intentional, reckless and/or negligent conduct or other unauthorized activities that violate federal, state or local laws and regulations, as well as the laws, regulations and rules of regulatory bodies such as the FDA; manufacturing standards; U.S. federal and state health care fraud and abuse, data privacy laws and other similar non-U.S. laws; or laws that require the

22

true, complete and accurate reporting of financial information or data. It is not always possible to identify and deter misconduct by employees and other third parties, and the precautions we take to detect and prevent this activity may not be effective in controlling unknown or unmanaged risks or losses or in protecting us from governmental investigations or other actions or lawsuits stemming from a failure to comply with such laws or regulations. In addition, we are subject to the risk that a person or government could allege such fraud or other misconduct, even if none occurred. If any such actions are instituted against us, and we are not successful in defending ourselves or asserting our rights, those actions could have a significant impact on our business and financial results, including, without limitation, the imposition of significant civil, criminal and administrative penalties, damages, monetary fines, disgorgements, possible exclusion from participation in Medicare, Medicaid and other U.S. health care programs, other sanctions, imprisonment, contractual damages, reputational harm, diminished profits and future earnings and curtailment of our operations, any of which could adversely affect our ability to operate our business and our results of operations.

Risks Related to Administrative, Organizational and Commercial Operations and Growth

If hospitals, ambulatory surgery centers and other health care facilities do not approve the use of our products, our sales may not increase.

In order for surgeons to use our products at hospitals, ambulatory surgery centers and other health care facilities, we are often required to obtain approval from those hospitals, ambulatory surgery centers and health care facilities. Typically, hospitals, ambulatory surgery centers and health care facilities review the comparative effectiveness and cost of products used in the facility. The makeup and evaluation processes for health care facilities vary considerably, and it can be a lengthy, costly and time-consuming effort to obtain approval by the relevant health care facilities. Additionally, hospitals, ambulatory surgery centers, other health care facilities and GPOs, which manage purchasing for multiple facilities, may also require us to enter into a purchase agreement and satisfy numerous elements of their administrative procurement process, which can also be a lengthy, costly and time-consuming effort. If we do not obtain access to hospitals, ambulatory surgery centers and other health care facilities in a timely manner, or at all, via their approvals or purchase contract processes, or otherwise, or if we are unable to obtain approvals or secure contracts in a timely manner, or at all, our operating costs will increase, our sales may decrease and our operating results may be adversely affected. Furthermore, we may expend significant efforts on these costly and time-consuming processes but may not be able to obtain necessary approvals or secure a purchase contract from such hospitals, ambulatory surgery centers, health care facilities or GPOs.

If adequate levels of reimbursement from third-party payors for procedures using our products are not obtained or maintained, surgeons and patients may be reluctant to use our products and our business will suffer.

In the United States, health care providers who purchase our products generally rely on third-party payors, principally federally-funded Medicare, state-funded Medicaid and private health insurance plans, to pay for all or a portion of the cost of bunion correction procedures and products utilized in those procedures. We may be unable to sell our products on a profitable basis if third-party payors deny coverage or reduce their current levels of reimbursement for procedures using products of the type we intend to offer. Our sales depend largely on governmental health care programs and private health insurers reimbursing patients’ medical expenses. Surgeons, hospitals and other health care providers may not purchase our products if they do not receive appropriate reimbursement from third-party payors for procedures using our products. Payors continue to review their coverage policies for existing and new therapies and may deny coverage for treatments that include the use of our products.

In addition, some health care providers in the United States have adopted or are considering bundled payment methodologies and/or managed care systems in which the providers contract to provide comprehensive health care for a fixed cost per person. Health care providers may attempt to control costs by authorizing fewer elective surgical procedures, including bunion correction surgeries, or by requiring the use of the least expensive

23

procedure available. In addition, third-party payors increasingly are requiring evidence that medical devices are cost-effective, and if we are unable to meet this requirement, the third-party payor may not reimburse the use of our products, which could reduce sales of our products to health care providers who depend upon reimbursement for payment. Changes in reimbursement policies or health care cost containment initiatives that limit or restrict reimbursement for procedures using our products may have an adverse effect on our business.

If we experience problems with, or are required to change, our suppliers or manufacturers, we may be unable to meet customer orders for our products in a timely manner or within our budget.

For us to be successful, our suppliers must be able to provide us with products and components in substantial quantities, in compliance with regulatory requirements, in accordance with agreed upon specifications, at acceptable costs and on a timely basis. An interruption in our commercial operations could occur if we encounter delays or difficulties in securing these components, and if we cannot then obtain an acceptable substitute. We rely on a limited number of suppliers for the components used in our products. Our suppliers may also not prioritize the production of our products compared to the suppliers’ larger customers so we may experience longer delays in receiving our requested orders.

If we are required to transition to new third-party suppliers for certain components of our products, the use of components or materials furnished by these alternative suppliers could require us to alter our operations. Any such interruption or alteration could harm our reputation, business, financial condition and results of operations.

Furthermore, if we are required to change the manufacturer of a critical component of our Lapiplasty System, we will be required to verify that the new manufacturer maintains facilities, procedures and operations that comply with our quality standards and applicable regulatory requirements, which could further impede our ability to manufacture our products in a timely manner. Transitioning to a new supplier could be time-consuming and expensive, may result in interruptions in our operations and product delivery, could affect the performance specifications of our products or could require that we modify the design of those products. A change in manufacturer could trigger the requirement to submit and obtain a new 510(k) clearance from the U.S. Food and Drug Administration (FDA), or similar international regulatory authorization before we implement the change, which could cause substantial delays. The occurrence of any of these events could harm our ability to meet the demand for our products in a timely manner or cost-effectively.

We cannot assure you that any need to change suppliers or manufacturers will not cause interruptions in our workflow. For example, if we should encounter delays or difficulties in securing, reconfiguring or revalidating the equipment and components we require for our Lapiplasty Systems, our reputation, business, financial condition and results of operations could be negatively impacted.

We may not be able to establish or strengthen our brand.

We believe that establishing and strengthening the Treace and Lapiplasty brands is important to achieving widespread acceptance of the Lapiplasty Procedure, particularly because of the highly competitive nature of the market for similar products. Promoting and positioning our brand will depend largely on the success of our medical education efforts and our ability to educate surgeons and patients. Additionally, we believe the quality and reliability of our product is critical to building physician support of this new surgical technique in the United States, and any negative publicity regarding the quality or reliability of the Lapiplasty System could significantly damage our reputation in the market. These brand promotion activities may not yield increased sales and, even if they do, any sales increases may not offset the expenses we incur to promote our brand. If we fail to successfully promote and maintain our brand, or if we incur substantial expenses in an unsuccessful attempt to promote and maintain our brand, our Lapiplasty solution may not be accepted by physicians or patients, which would adversely affect our business, results of operations and financial condition.

24

Our inability to maintain contractual relationships with health care professionals could have a negative impact on our research and development and medical education programs.

We maintain contractual relationships with respected physicians and medical personnel in hospitals, private practice and universities who assist in clinical studies, product research and development and in the training of surgeons on the safe and effective use of our products (see “Business — Product Development and our Surgeon Advisory Board”). We continue to place emphasis on the validation of the benefits of the Lapiplasty Procedure through clinical studies, the development of proprietary products and product improvements to develop our product lines as well as providing high quality training on those products. If we are unable to maintain these relationships, our ability to develop and market new and improved products and train on the use of those products could decrease, and future operating results could be unfavorably affected.

We may be unable to continue to successfully demonstrate to surgeons or key opinion leaders the merits of our products and technologies compared to those of our competitors, which may make it difficult to establish our products and technologies as a standard of care and achieve market acceptance.

Surgeons play the primary role in determining the course of treatment and, ultimately, the type of products that will be used to treat a patient. As a result, our success depends, in large part, on our ability to effectively market and demonstrate to foot and ankle surgeons the merits of our products and methodologies compared to those of our competitors. Acceptance of our products and methodologies depends on educating surgeons as to the distinctive characteristics, clinical benefits, safety and cost-effectiveness of the Lapiplasty Procedure and our other products and technologies as compared to those of our competitors, and on training surgeons in the proper use of our products. If we are not successful in convincing surgeons of the merits of our products and methodologies or educating them on the use of our products, they may not use our products or may not use them effectively and we may be unable to increase our sales, sustain our growth or achieve and sustain profitability.

Also since the Lapiplasty Procedure is a new procedure, some surgeons may be reluctant to change their surgical treatment practices for the following reasons, among others:

These reasons may affect the pace of adoption of the Lapiplasty Procedure and future products and techniques that we may offer.

In addition, we believe recommendations and support of our products and technologies by influential surgeons and key opinion leaders in our industry are essential for market acceptance and establishment of our products and procedures as a standard of care. If we do not receive support from such surgeons and key opinion leaders, if long-term data does not show the benefits of using our products and procedures or if the benefits offered by our products and procedures are not sufficient to justify their cost, surgeons, hospitals and other health care facilities may not use our products and we might be unable to establish our products and procedures as a standard of care and continue to achieve market acceptance.

25

If surgeons fail to safely and appropriately use our products, or if we are unable to train podiatrists and orthopaedic surgeons on the safe and appropriate use of our products, we may be unable to achieve our expected sales, growth or profitability.

An important part of our sales process includes our ability to screen for and identify podiatrists and orthopaedic surgeons who have the requisite training and experience to safely and appropriately use our products and to train a sufficient number of these surgeons and to provide them with adequate instruction in use of our products. There is a training process involved for surgeons to become proficient in the safe and appropriate use of our products. This training process may take longer or be more expensive than expected and may therefore affect our ability to increase sales. Convincing surgeons to dedicate the time and energy necessary for adequate training is challenging, and we may not be successful in these efforts. Recent changes to federal guidance regarding medical education programs under the federal Anti-Kickback Statute also could limit our ability to train podiatrists and orthopaedic surgeons, and such programs could be subject to challenge under the federal Anti-Kickback Statute. Furthermore, if clinicians are not properly trained, they may misuse or ineffectively use our products. Any improper use of our products may result in unsatisfactory outcomes, patient injury, negative publicity or lawsuits against us, any of which could harm our reputation and affect future product sales. Accordingly, if surgeons fail to safely and appropriately use our products or if we are unable to train surgeons on the safe and appropriate use of our products, we may be unable to achieve our expected sales, growth or profitability.

The loss of any member on our executive management team or our inability to attract and retain highly skilled members of our sales management and marketing teams and engineers could have a material adverse effect on our business, financial condition and results of operations.

Our success depends on the skills, experience and performance of the members of our executive management team and John T. Treace, our founder and chief executive officer, in particular. The individual and collective efforts of these executives will be important as we continue to commercialize our existing products, develop new products and technologies and expand our commercial activities. The loss or incapacity of existing members of our executive management team could have a material adverse effect on our business, financial condition and results of operations if we experience difficulties in hiring qualified successors. We do not maintain “key person” insurance for any of our executives or key employees.

Our commercial, quality and research and development programs and operations depend on our ability to attract and retain highly skilled team members. We may be unable to attract or retain qualified team members. All of our employees are at-will, which means that either we or the employee may terminate his or her employment at any time. The loss of key employees, failure of any key employee to perform, our inability to attract and retain skilled employees, as needed, or our inability to effectively plan for and implement a succession plan for key employees could have a material adverse effect on our business, financial condition and results of operations.

Any future international expansion will subject us to additional costs and risks that may have a material adverse effect on our business, financial condition and results of operations.

Historically, all of our sales have been to customers in the United States. To the extent we enter into international markets in the future, there are significant costs and risks inherent in conducting business in international markets. If we expand, or attempt to expand, into foreign markets, we will be subject to new business risks, in addition to regulatory risks. In addition, expansion into foreign markets imposes additional burdens on our executive and administrative personnel, finance and legal teams, research and marketing teams and general managerial resources.

We have limited experience with regulatory environments and market practices internationally, and we may not be able to penetrate or successfully operate in new markets. We may also encounter difficulty expanding into international markets because of limited brand recognition in certain parts of the world, leading to delayed

26

acceptance of our products by surgeons and their patients, hospitals, ambulatory surgery centers and payors in these international markets. If we are unable to expand internationally and manage the complexity of international operations successfully, it could have a material adverse effect on our business, financial condition and results of operations. If our efforts to introduce our products into foreign markets are not successful, we may have expended significant resources without realizing the expected benefit. Ultimately, the investment required for expansion into foreign markets could exceed the results of operations generated from this expansion.

Risks Related to Our Intellectual Property

If we are unable to obtain significant patent protection for our products, or if our patents and other intellectual property rights do not adequately protect our products, we may be unable to gain significant market share and be unable to operate our business profitably.

We will rely on patents, trade secrets, copyrights, know-how, trademarks, license agreements and contractual provisions to establish our intellectual property rights and protect our products. These legal means, however, afford only limited protection and may not completely protect our rights.

As of December 31, 2020, our patent portfolio included 21 owned U.S. patents, one licensed U.S. patent, 27 pending U.S. patent applications, three pending international PCT patent applications, and 20 corresponding non-U.S. patent applications. We cannot assure you that our intellectual property position will not be challenged or that all patents for which we have applied will be granted. The validity and breadth of claims in patents involve complex legal and factual questions and, therefore, may be highly uncertain. Uncertainties and risks that we face include the following:

The patent prosecution process is expensive and time-consuming, and we may not be able to file, prosecute, maintain, enforce or license all necessary or desirable patent applications at a reasonable cost or in a timely manner, or in all jurisdictions. We may choose not to seek patent protection for certain innovations and may choose not to pursue patent protection in certain jurisdictions, and under the laws of certain jurisdictions, patents or other intellectual property rights may be unavailable or limited in scope. It is also possible that we will fail to identify patentable aspects of our developments before it is too late to obtain patent protection.

In addition, the laws of foreign jurisdictions may not protect our rights to the same extent as the laws of the United States. For example, most countries outside of the United States do not allow patents for methods of treating the human body. This may preclude us from obtaining method patents outside of the United States having similar scope to those we have obtained or may obtain in the future in the United States. This includes certain key method patents covering the Lapiplasty Procedure. Changes in either the patent laws or interpretation of the patent laws in the United States and other countries may diminish the value of our patents or narrow the scope of our patent protection.

Moreover, we may be subject to a third-party pre-issuance submission of prior art to the U.S. Patent and Trademark Office (USPTO) or patent offices in foreign jurisdictions, or become involved in opposition, derivation, reexamination, inter partes review, post-grant review or interference proceedings challenging our

27

patent rights or the patent rights of others. An adverse determination in any such submission, proceeding or litigation could reduce the scope of, or invalidate, our patent rights, allow third parties to commercialize our technology and compete directly with us, without payment to us.

The issuance of a patent is not conclusive as to its inventorship, scope, validity or enforceability, and our patents may be challenged in the courts or patent offices in the United States and abroad. Such challenges may result in loss of exclusivity or freedom to operate or in patent claims being narrowed, invalidated or held unenforceable, in whole or in part, which could limit our ability to stop others from using or commercializing similar or identical products and techniques, or limit the duration of the patent protection of our technology.

While we are aware of several third-party patents of interests, we do not believe that any of our products infringe any valid claims of patents or other proprietary rights held by others. However, there can be no assurances that we do not infringe any patents or other proprietary rights held by third parties. If our products were found to infringe any proprietary right of another party, we could be required to pay significant damages or license fees to such party and/or cease production, marketing and distribution of those products. Litigation may also be necessary to defend infringement claims of third parties or to enforce patent rights we hold or to protect trade secrets or techniques we own.

We also rely on trade secrets and other unpatented proprietary technology. There can be no assurances that we can meaningfully protect our rights in our unpatented proprietary technology or that others will not independently develop substantially equivalent proprietary products or processes or otherwise gain access to our proprietary technology. We seek to protect our trade secrets and proprietary know-how, in part, with confidentiality agreements with employees and consultants that include customary intellectual property assignment obligations. There can be no assurances, however, that the agreements will not be breached, adequate remedies for any breach would be available or competitors will not discover our trade secrets or independently develop comparable intellectual property.

Obtaining and maintaining patent protection depends on compliance with various procedural, document submission, fee payment and other requirements imposed by governmental patent agencies, and our patent protection could be reduced or eliminated for non-compliance with these requirements.

The USPTO and various foreign governmental patent agencies require compliance with a number of procedural, documentary, fee payment and other similar provisions during the patent application process. In addition, periodic maintenance fees, renewal fees, annuity fees and various other government fees on issued patents often must be paid to the USPTO and foreign patent agencies over the lifetime of the patent and/or applications and any patent rights we may obtain in the future. While an unintentional lapse of a patent or patent application can in many cases be cured by payment of a late fee or by other means in accordance with the applicable rules, there are situations in which noncompliance can result in abandonment or lapse of the patent or patent application, resulting in partial or complete loss of patent rights in the relevant jurisdiction. Non-compliance events that could result in abandonment or lapse of a patent or patent application include, but are not limited to, failure to respond to official actions within prescribed time limits, non-payment of fees and failure to properly legalize and submit formal documents. If we fail to maintain the patents and patent applications covering our products, we may not be able to stop a competitor from marketing products that are the same as or similar to our products, which would have a material adverse effect on our business.

Although we are not presently a party to lawsuits or administrative proceedings involving patents or other intellectual property, the possibility exists that we may be in the future. If we were to lose any future intellectual property lawsuits, a court could require us to pay significant damages and/or prevent us from selling our products.

The medical device industry is litigious with respect to patents and other intellectual property rights. Companies in the medical device industry have used intellectual property litigation to gain a competitive advantage.

28

Although we are not presently a party to lawsuits or administrative proceedings involving patents or other intellectual property, including interference proceedings, post grant review and inter partes review before the USPTO or the equivalent foreign patent authority, the possibility exists that we may be in the future. A legal proceeding, regardless of the outcome, could drain our financial resources and divert the time and effort of our management. Protracted litigation to defend or prosecute our intellectual property rights could result in our customers or potential customers deferring or limiting their purchase or use of the affected products until resolution of the litigation.

If we are found to infringe a third party’s intellectual property rights, we could be required to obtain a license from such third party to continue selling, developing and marketing our products and techniques. However, we may not be able to obtain any required license on commercially reasonable terms or at all. Even if we were able to obtain a license, it could be non-exclusive, thereby giving our competitors access to the same technologies licensed to us. We could be forced, including by court order, to cease commercializing the infringing technology or product. In addition, we could be found liable for monetary damages, including treble damages and attorneys’ fees if we are found to have willfully infringed a patent. A finding of infringement could force us to cease some of our business operations, which could materially harm our business. Claims that we have misappropriated the confidential information or trade secrets of third parties could have a similar negative impact on our business. Intellectual property litigation may lead to unfavorable publicity that harms our reputation and causes the market price of our common shares to decline.

Because competition in our industry is intense, competitors may infringe or otherwise violate our issued patents, patents of our licensors or other intellectual property. To counter infringement or unauthorized use, we may be required to file infringement claims, which can be expensive and time consuming, and could distract our technical and management personnel from their normal responsibilities. Any claims we assert against perceived infringers could provoke these parties to assert counterclaims or file administrative actions against us alleging that we infringe their patents. In addition, in a patent infringement proceeding, a court may decide that a patent of ours is invalid or unenforceable, in whole or in part, construe the patent’s claims narrowly or refuse to stop the other party from using the technology at issue on the grounds that our patents do not cover the technology in question. An adverse result in any litigation proceeding or administrative action could put one or more of our patents at risk of being invalidated or interpreted narrowly. Our competitors may assert invalidity on various grounds, including lack of novelty, obviousness or that we were not the first applicant to file a patent application related to our product. We may elect to enter into license agreements in order to settle patent infringement claims or to resolve disputes before litigation, and any such license agreements may require us to pay royalties and other fees that could be significant. Furthermore, because of the substantial amount of discovery required in connection with intellectual property litigation, there is a risk that some of our confidential information could be compromised by disclosure.

Our competitors, many of which have made substantial investments in patent portfolios, trade secrets, trademarks and competing technologies, may have applied for or obtained, or may in the future apply for or obtain, patents or trademarks that may prevent, limit or otherwise interfere with our ability to make, use, sell and/or export our products or to use our technologies or product names. Moreover, individuals and groups that are non-practicing entities, commonly referred to as “patent trolls,” purchase patents and other intellectual property assets for the purpose of making claims of infringement in order to extract settlements. From time to time, we may receive threatening letters, notices or “invitations to license,” or may be the subject of claims that our products and business operations infringe or violate the intellectual property rights of others. The defense of these matters can be time consuming, costly to defend in litigation, divert management’s attention and resources, damage our reputation and brand and cause us to incur significant expenses or make substantial payments.

29

If we fail to execute invention assignment agreements with our employees and contractors involved in the development of intellectual property or are unable to protect the confidentiality of our trade secrets, the value of our products and our business and competitive position could be harmed.

In addition to patent protection, we also rely on protection of copyright, trade secrets, know-how and confidential and proprietary information. We generally enter into confidentiality and invention assignment agreements with our employees, consultants and third parties upon their commencement of a relationship with us. However, we may not enter into such agreements with all employees, consultants and third parties who have been involved in the development of our intellectual property. In addition, these agreements may not provide meaningful protection against the unauthorized use or disclosure of our trade secrets or other confidential information, and adequate remedies may not exist if unauthorized use or disclosure were to occur. The exposure of our trade secrets and other proprietary information would impair our competitive advantages and could have a material adverse effect on our business, financial condition and results of operations. In particular, a failure to protect our proprietary rights may allow competitors to copy our products and procedures, which could adversely affect our pricing and market share. Further, other parties may independently develop substantially equivalent know-how and technology.

In addition to contractual measures, we try to protect the confidential nature of our proprietary information using commonly accepted physical and technological security measures. Such measures may not, for example, in the case of misappropriation of a trade secret by an employee or third party with authorized access, provide adequate protection for our proprietary information. Our security measures may not prevent an employee or consultant from misappropriating our trade secrets and providing them to a competitor, and recourse we take against such misconduct may not provide an adequate remedy to protect our interests fully. Unauthorized parties may also attempt to copy or reverse engineer certain aspects of our products that we consider proprietary. Enforcing a claim that a party illegally disclosed or misappropriated a trade secret can be difficult, expensive and time-consuming, and the outcome is unpredictable. Even though we use commonly accepted security measures, trade secret violations are often a matter of state law, and the criteria for protection of trade secrets can vary among different jurisdictions. In addition, trade secrets may be independently developed by others in a manner that could prevent legal recourse by us. While we have agreements with our employees, consultants and third parties that obligate them to assign their inventions to us, these agreements may not be self-executing, not all employees or consultants may enter into such agreements, or employees or consultants may breach or violate the terms of these agreements, and we may not have adequate remedies for any such breach or violation. If any of our intellectual property or confidential or proprietary information, such as our trade secrets, were to be disclosed or misappropriated, or if any such information was independently developed by a competitor, it could have a material adverse effect on our competitive position, business, financial condition, results of operations and prospects.

If our trademarks and trade names are not adequately protected, we may not be able to build name recognition in our markets of interest and our competitive position may be harmed.

We rely on our trademarks, trade names and brand names to distinguish our products from the products of our competitors, and have registered or applied to register many of these trademarks. There can be no assurance that our trademark applications will be approved. Third parties may also oppose our trademark applications or otherwise challenge our use of the trademarks. In the event that our trademarks are successfully challenged, we could be forced to rebrand our products, which could result in loss of brand recognition, and could require us to devote resources to advertising and marketing new brands. Further, there can be no assurance that competitors will not infringe our trademarks or that we will have adequate resources to enforce our trademarks. We also license third parties to use our trademarks. In an effort to preserve our trademark rights, we enter into license agreements with these third parties, which govern the use of our trademarks and require our licensees to abide by quality control standards with respect to the goods and services that they provide under our trademarks. Although we make efforts to monitor the use of our trademarks by our licensees, there can be no assurance that these efforts will be sufficient to ensure that our licensees abide by the terms of their licenses. In the event that our

30

licensees fail to do so, our trademark rights could be diluted. Any of the foregoing could have a material adverse effect on our competitive position, business, financial condition, results of operations and prospects.

Patent terms may not be sufficient to effectively protect our products and business for an adequate period of time.

Patents have a limited lifespan. In the United States, the natural expiration of a patent is generally 20 years after its first effective non-provisional filing date. Although various extensions may be available, the term of a patent, and the protection it affords, is limited. Even if patents covering our proprietary technologies and their uses are obtained, once the patent has expired, we may be open to competition. In addition, although upon issuance in the United States a patent’s term can be extended based on certain delays caused by the USPTO, this extension can be reduced or eliminated based on certain delays caused by the patent applicant during patent prosecution. Given the amount of time required for the development, testing and regulatory review of new products, patents protecting such products might expire before or shortly after such products are commercialized. If we do not have sufficient patent terms to protect our products, proprietary technologies and their uses, our business would be seriously harmed.

Changes in U.S. patent laws may limit our ability to obtain, defend and/or enforce our patents.

Patent reform legislation could increase the uncertainties and costs surrounding the prosecution of our patent applications and the enforcement or defense of our issued patents. The Leahy-Smith America Invents Act (Leahy-Smith Act) includes a number of significant changes to U.S. patent law. These include provisions that affect the way patent applications are prosecuted and also affect patent litigation. The USPTO has developed regulations and procedures to govern administration of the Leahy-Smith Act, and many of the substantive changes to patent law associated with the Leahy-Smith Act, and in particular, the first to file provisions, which became effective on March 16, 2013. The first to file provisions limit the rights of an inventor to patent an invention if not the first to file an application for patenting that invention, even if such invention was the first invention. Accordingly, it is not clear what, if any, impact the Leahy-Smith Act will have on the operation of our business.

However, the Leahy-Smith Act and its implementation could increase the uncertainties and costs surrounding the enforcement and defense of our issued patents. For example, the Leahy-Smith Act provides that an administrative tribunal known as the Patent Trial and Appeals Board (PTAB), provides a venue for challenging the validity of patents at a cost that is much lower than district court litigation and on timelines that are much faster. Although it is not clear what, if any, long-term impact the PTAB proceedings will have on the operation of our business, the initial results of patent challenge proceedings before the PTAB since its inception in 2013 have resulted in the invalidation of many U.S. patent claims. The availability of the PTAB as a lower-cost, faster and potentially more potent tribunal for challenging patents could increase the likelihood that our own patents will be challenged, thereby increasing the uncertainties and costs of maintaining and enforcing them.

We may be unable to enforce our intellectual property rights throughout the world.

The laws of some foreign countries do not protect intellectual property rights to the same extent as the laws of the United States. Many companies have encountered significant problems in protecting and defending intellectual property rights in certain foreign jurisdictions. This could make it difficult for us to stop infringement of our foreign patents, if obtained, or the misappropriation of our other intellectual property rights. For example, some foreign countries have compulsory licensing laws under which a patent owner must grant licenses to third parties. In addition, some countries limit the enforceability of patents against third parties, including government agencies or government contractors. In these countries, patents may provide limited or no benefit. Patent protection must ultimately be sought on a country-by-country basis, which is an expensive and time-consuming process with uncertain outcomes. Accordingly, we may choose not to seek patent protection in certain countries, and we will not have the benefit of patent protection in such countries.

31

Proceedings to enforce our patent rights in foreign jurisdictions could result in substantial costs and divert our efforts and attention from other aspects of our business. Accordingly, our efforts to protect our intellectual property rights in such countries may be inadequate. In addition, changes in the law and legal decisions by courts in the United States and foreign countries may affect our ability to obtain adequate protection for our technology and the enforcement of our intellectual property.

We may be subject to claims that we or our employees have misappropriated the intellectual property of a third party, including trade secrets or know-how, or are in breach of non-competition or non-solicitation agreements with our competitors and third parties may claim an ownership interest in intellectual property we regard as our own.

Many of our employees and consultants were previously employed at or engaged by other medical device companies, including our competitors or potential competitors. Some of these employees, consultants and contractors may have executed proprietary rights, non-disclosure and non-competition agreements in connection with such previous employment. Although we try to ensure that our employees and consultants do not use the intellectual property, proprietary information, know-how or trade secrets of others in their work for us, we may be subject to claims that we or these individuals have, inadvertently or otherwise, misappropriated the intellectual property or disclosed the alleged trade secrets or other proprietary information, of these former employers, competitors or other third parties. Additionally, we may be subject to claims from third parties challenging our ownership interest in or inventorship of intellectual property we regard as our own, for example, based on claims that our agreements with employees or consultants obligating them to assign intellectual property to us are ineffective or in conflict with prior or competing contractual obligations to assign inventions to another employer, to a former employer, or to another person or entity. Litigation may be necessary to defend against claims, and it may be necessary or we may desire to enter into a license to settle any such claim; however, there can be no assurance that we would be able to obtain a license on commercially reasonable terms, if at all. If our defense to those claims fails, in addition to paying monetary damages or a settlement payment, a court could prohibit us from using technologies, features or other intellectual property that are essential to our products, if such technologies or features are found to incorporate or be derived from the trade secrets or other proprietary information of the former employers. An inability to incorporate technologies, features or other intellectual property that are important or essential to our products could have a material adverse effect on our business and competitive position, and may prevent us from selling our products. In addition, we may lose valuable intellectual property rights or personnel. Even if we are successful in defending against these claims, litigation could result in substantial costs and could be a distraction to management. Any litigation or the threat thereof may adversely affect our ability to hire employees or contract with independent sales representatives. A loss of key personnel or their work product could hamper or prevent our ability to commercialize our products, which could materially and adversely affect our business, financial condition, operating results, cash flows and prospects.

Risks Related to Regulatory Matters

We are subject to substantial government regulation that could have a material adverse effect on our business.

Our products are regulated as medical devices. The production and marketing of our products and its ongoing research and development, pre-clinical testing and clinical trial activities are subject to extensive regulation and review by numerous governmental authorities both in the United States and abroad. U.S. and foreign regulations govern the design, development, testing, clinical trials, premarket clearance and approval, safety, marketing and registration of new medical devices, in addition to regulating manufacturing practices, reporting, labeling, relationships with health care professionals and recordkeeping procedures. The regulatory process requires significant time, effort and expenditures to bring our products to market, and we cannot be assured that any of our products will be approved. The regulations to which we are subject are complex and have tended to become more stringent over time. Our failure to comply with applicable regulatory requirements could result in these governmental authorities:

32

Our relationships with customers, physicians and third-party payors are subject to federal and state health care fraud and abuse laws, false claims laws, physician payment transparency laws and other health care laws and regulations. If we or our employees, independent contractors, consultants, commercial partners, or vendors violate these laws we could face substantial penalties.

Our relationships with customers, physicians and third-party payors are subject to federal and state health care fraud and abuse laws, false claims laws, physician payment transparency laws and other health care laws and regulations. In particular, the promotion, sales and marketing of health care items and services is subject to extensive laws and regulations designed to prevent fraud, kickbacks, self-dealing and other abusive practices. These laws and regulations may restrict or prohibit a wide range of pricing, discounting, marketing and promotion, sales commission, customer incentive and other business arrangements. The U.S. health care laws and regulations that may affect our ability to operate include, but are not limited to:

33

Because of the breadth of these laws and the narrowness of the statutory exceptions and regulatory safe harbors available, it is possible that some of our business activities, patient outreach programs or our arrangements with physicians, independent sales agents and customers could be subject to challenge under one or more of such laws. It is not always possible to identify and deter employee misconduct or business noncompliance, and the precautions we take to detect and prevent inappropriate conduct may not be effective in controlling unknown or unmanaged risks or losses or in protecting us from governmental investigations or other actions or lawsuits stemming from a failure to be in compliance with such laws or regulations. Efforts to ensure that our business arrangements will comply with applicable health care laws may involve substantial costs. It is possible that governmental and enforcement authorities will conclude that our business practices may not comply with current or future statutes, regulations or case law interpreting applicable fraud and abuse or other health care laws and regulations.

If we or our employees, agents, independent contractors, consultants, commercial partners and vendors violate these laws, we may be subject to investigations, enforcement actions and/or significant penalties, including the imposition of significant civil, criminal and administrative penalties, damages, disgorgement, monetary fines, imprisonment, possible exclusion from participation in Medicare, Medicaid and other federal health care programs, contractual damages, reputational harm, diminished profits and future earnings, additional reporting requirements and/or oversight if we become subject to a corporate integrity agreement or similar agreement to resolve allegations of non-compliance with these laws, and curtailment of our operations, any of which could adversely affect our ability to operate our business and our results of operations.

We may not receive, or may be delayed in receiving, the necessary clearances or approvals for our future products or modifications to our current products, and failure to timely obtain necessary clearances or approvals for our future products or modifications to our current products would adversely affect our ability to grow our business.

In the United States, before we can market a new medical device, or a new use of, new claim for or significant modification to an existing product, we must first receive either clearance under Section 510(k) of the

34

Federal Food, Drug, and Cosmetic Act (FDCA) or approval of a premarket approval (PMA), from the FDA, unless an exemption applies. In the 510(k) clearance process, before a device may be marketed, the FDA must determine that a proposed device is “substantially equivalent” to a legally-marketed “predicate” device, which includes a device that has been previously cleared through the 510(k) process, a device that was legally marketed before May 28, 1976 (pre-amendments device), a device that was originally on the U.S. market pursuant to an approved PMA and later down-classified, or a 510(k)-exempt device. To be “substantially equivalent,” the proposed device must have the same intended use as the predicate device, and either have the same technological characteristics as the predicate device or have different technological characteristics and not raise different questions of safety or effectiveness than the predicate device. Clinical data are sometimes required to support substantial equivalence. In the process of obtaining PMA approval, the FDA must determine that a proposed device is safe and effective for its intended use based, in part, on extensive data, including, but not limited to, technical, pre-clinical, clinical trial, manufacturing and labeling data. The PMA process is typically required for devices that are deemed to pose the greatest risk, such as life-sustaining, life-supporting or implantable devices. To date, our products have received marketing authorization pursuant to the 510(k) clearance process.

Modifications to products that are approved through a PMA application generally require FDA approval. Similarly, certain modifications made to products cleared through a 510(k) may require a new 510(k) clearance. Both the PMA and the 510(k) clearance process can be expensive, lengthy and uncertain. The FDA’s 510(k) clearance process usually takes from three to 12 months, but can last longer. The process of obtaining a PMA is much more costly and uncertain than the 510(k) clearance process and generally takes from one to three years, or even longer, from the time the application is submitted to the FDA. In addition, a PMA generally requires the performance of one or more clinical trials. Despite the time, effort and cost, a device may not be approved or cleared by the FDA. Any delay or failure to obtain necessary regulatory clearances or approvals could harm our business. Furthermore, even if we are granted regulatory clearances or approvals, they may include significant limitations on the indicated uses for the device, which may limit the market for the device.

In the United States, we have obtained clearance of our Lapiplasty System products through the 510(k) clearance process. Any modification to these systems that has not been previously cleared may require us to submit a new 510(k) premarket notification and obtain clearance, or submit a PMA and obtain FDA approval before implementing the change. Specifically, any modification to a 510(k)-cleared device that could significantly affect its safety or effectiveness, or that would constitute a major change in its intended use, design or manufacture, requires a new 510(k) clearance or, possibly, approval of a PMA. The FDA requires every manufacturer to make this determination in the first instance, but the FDA may review any manufacturer’s decision. The FDA may not agree with our decisions regarding whether new clearances or approvals are necessary. We have made modifications to 510(k)-cleared products in the past and have determined based on our review of the applicable FDA regulations and guidance that in certain instances new 510(k) clearances or PMA approvals were not required. We may make modifications or add additional features in the future that we believe do not require a new 510(k) clearance or approval of a PMA. If the FDA disagrees with our determination and requires us to submit new 510(k) notifications or PMA applications for modifications to our previously cleared products for which we have concluded that new clearances or approvals are unnecessary, we may be required to cease marketing or to recall the modified product until we obtain clearance or approval, and we may be subject to significant regulatory fines or penalties. If the FDA requires us to go through a lengthier, more rigorous examination for future products or modifications to existing products than we had expected, product introductions or modifications could be delayed or canceled, which could adversely affect our ability to grow our business. The FDA can delay, limit or deny clearance or approval of a device for many reasons, including:

35

Failure to comply with post-marketing regulatory requirements could subject us to enforcement actions, including substantial penalties, and might require us to recall or withdraw a product from the market.

Even though we have obtained clearance for our Lapiplasty products in the United States, we are subject to ongoing and pervasive regulatory requirements governing, among other things, the manufacture, marketing, advertising, medical device reporting, sale, promotion, import, export, registration and listing of devices. For example, we must submit periodic reports to the FDA as a condition of 510(k) clearance. These reports include information about failures and certain adverse events associated with the device after its clearance. Failure to submit such reports, or failure to submit the reports in a timely manner, could result in enforcement action by the FDA. Following its review of the periodic reports, the FDA might ask for additional information or initiate further investigation. In addition, any marketing authorizations we are granted are limited to the cleared indications for use. Further, the manufacturing facilities for a product are subject to periodic review and inspection. Subsequent discovery of problems with a product, manufacturer, or manufacturing facility may result in restrictions on the product, manufacturer or manufacturing facility, withdrawal of the product from the market or other enforcement actions.

The regulations to which we are subject are complex and have become more stringent over time. Regulatory changes could result in restrictions on our ability to continue or expand our operations, higher than anticipated costs, or lower than anticipated sales. Plus regulation such as the FDA and other state and foreign regulatory authorities have broad enforcement powers. Our failure to comply with applicable regulatory requirements could result in enforcement action by the FDA, state or foreign regulatory authorities, which may include any of the following sanctions:

Any of these sanctions could result in higher than anticipated costs or lower than anticipated sales and have a material adverse effect on our reputation, business, financial condition and results of operations. In addition, the FDA may change its clearance policies, adopt additional regulations or revise existing regulations or take other actions, which may prevent or delay clearance or approval of our future products under development or impact our ability to modify our currently cleared products on a timely basis. Such policy or regulatory changes could impose additional requirements upon us that could delay our ability to obtain new clearances or approvals, increase the costs of compliance or restrict our ability to maintain our clearances of our current products.

36

Legislative or regulatory reforms may have a material adverse effect on us.

From time to time, legislation is drafted and introduced in Congress that could significantly change the statutory provisions governing the regulation of medical devices. In addition, the FDA may change its clearance and approval policies, adopt additional regulations or revise existing regulations or take other actions, which may prevent or delay approval or clearance of our future products under development or impact our ability to modify our currently cleared products on a timely basis. Over the last several years, the FDA has proposed reforms to its 510(k) clearance process, and such proposals could include increased requirements for clinical data and a longer review period, or could make it more difficult for manufacturers to utilize the 510(k) clearance process for their products. For example, in November 2018, FDA officials announced steps that the FDA intends to take to modernize the 510(k) premarket notification pathway. Among other things, the FDA announced that it plans to develop proposals to drive manufacturers utilizing the 510(k) pathway toward the use of newer predicates. These proposals include plans to potentially sunset certain older devices that were used as predicates under the 510(k) clearance pathway, and to potentially publish a list of devices that have been cleared on the basis of demonstrated substantial equivalence to predicate devices that are more than 10 years old. In September 2019, the FDA also issued revised final guidance establishing a “Safety and Performance Based Pathway” for “manufacturers of certain well-understood device types” allowing manufacturers to rely on objective safety and performance criteria recognized by the FDA to demonstrate substantial equivalence, obviating the need for manufacturers to compare the safety and performance of their medical devices to specific predicate devices in the clearance process. The FDA has developed and maintains a list of device types appropriate for the “safety and performance based” pathway and will continue to develop product-specific guidance documents that identify the performance criteria and recommended testing methodologies for each such device type, where feasible. Some of these proposals have not yet been finalized or adopted, and the FDA announced that it would seek public feedback before publication of any such proposals, and may work with Congress to implement such proposals through legislation. Accordingly, it is unclear the extent to which any proposals, if adopted, could impose additional regulatory requirements on us that could delay our ability to obtain new 510(k) clearances, increase the costs of compliance, or restrict our ability to maintain our current clearances, or otherwise create competition that may negatively affect our business.

In addition, FDA regulations and guidance are often revised or reinterpreted by the FDA in ways that may significantly affect our business and our products. Any new statutes, regulations or revisions or reinterpretations of existing regulations may impose additional costs or lengthen review times of any future products or make it more difficult to obtain clearance or approval for, manufacture, market or distribute our products. We cannot determine what effect changes in regulations, statutes, legal interpretation or policies, when and if promulgated, enacted or adopted may have on our business in the future. Such changes could, among other things, require additional testing before obtaining clearance or approval; changes to manufacturing methods; recall, replacement or discontinuance of our products; or additional record keeping.

The FDA’s and other regulatory authorities’ policies may change and additional government regulations may be promulgated that could prevent, limit or delay regulatory clearance or approval of our product candidates. We cannot predict the likelihood, nature or extent of government regulation that may arise from future legislation or administrative action, either in the United States or abroad. For example, the new administration following the 2020 U.S. Presidential Election may impact our business and industry. Namely, the Trump administration took several executive actions, including the issuance of a number of executive orders, that could impose significant burdens on, or otherwise materially delay, the FDA’s ability to engage in routine regulatory and oversight activities, such as implementing statutes through rulemaking, issuance of guidance and review and approval of marketing applications. It is difficult to predict whether or how these executive actions will be implemented, or whether they will be rescinded and replaced under the Biden administration. The policies and priorities of the incoming administration are unknown and could materially impact the regulations governing our product candidates. If we are slow or unable to adapt to changes in existing requirements or the adoption of new requirements or policies, or if we are not able to maintain regulatory compliance, we may be subject to enforcement action, and we may not achieve or sustain profitability.

37

In addition, in response to perceived increases in health care costs in recent years there have been and continue to be proposals by the federal government, state governments, regulators and third-party payors to control these costs and, more generally, to reform the U.S. health care system. Certain of these proposals could limit the prices we will be able to charge for our products or the amount of reimbursement available for our products and could limit the acceptance and availability of our products.

In March 2010, the federal government enacted the ACA. Among other provisions, the ACA established new value-based payment programs, increased funding of comparative effectiveness research, reduced hospital payments for avoidable readmissions and hospital acquired conditions, and pilot programs to evaluate alternative payment methodologies that promote care coordination (such as bundled physician and hospital payments). Additionally, the ACA included a reduction in the annual rate of inflation for Medicare payments to hospitals that began in 2011. Also, Medicare payments to providers are subject to a 2% reduction per fiscal year, effective on April 1, 2013 and, will remain in effect through 2030 unless additional Congressional action is taken. However, due to COVID-19 relief legislation, such reductions have been temporarily suspended from May 1, 2020 through March 31, 2021.

Since its enactment, there have been judicial, executive and Congressional challenges to certain aspects of the ACA, and the U.S. Supreme Court is currently reviewing the constitutionality of the ACA, although it is unclear how the Supreme Court will rule. Although the U.S. Supreme Court has not yet ruled on the constitutionality of the ACA, on January 28, 2021, President Biden issued an executive order to initiate a special enrollment period from February 15, 2021 through May 15, 2021 for purposes of obtaining health insurance coverage through the ACA marketplace. The executive order also instructs certain governmental agencies to review and reconsider their existing policies and rules that limit access to health care, including among others, reexamining Medicaid demonstration projects and waiver programs that include work requirements, and policies that create unnecessary barriers to obtaining access to health insurance coverage through Medicaid or the ACA. It is unclear how the U.S. Supreme Court ruling, other such litigation, and the health care reform measures of the Biden administration will impact the ACA. There are additional state and federal health care reform measures under consideration that may be adopted in the future which could have a material adverse effect on our industry generally and on our customers. We cannot predict what health care programs and regulations will be ultimately implemented at the federal or state level, or the effect of any future legislation or regulation. However, any regulatory and legal changes that lower reimbursement for our products, increase taxes on our medical devices, increase cost containment pressures on us or others in the health care sector or reduce medical procedure volumes could adversely affect our business, financial condition, results of operations or cash flows.

Our products must be manufactured in accordance with federal and state quality regulations and are subject to FDA inspection, and our failure to comply with these regulations could result in fines, product recalls, product liability claims, limits on future product clearances, reputational damage and other adverse impacts.

The methods used in, and the facilities used for, the manufacture of our products must comply with the FDA’s Quality System Regulation (QSR) which is a complex regulatory scheme that covers the procedures and documentation of the design, testing, production, process controls, quality assurance, labeling, packaging, handling, storage, distribution, installation, servicing and shipping of medical devices. Furthermore, we are required to verify that our suppliers maintain facilities, procedures and operations that comply with our quality standards and applicable regulatory requirements. The FDA enforces the QSR through periodic announced or unannounced inspections of medical device manufacturing facilities, which may include the facilities of subcontractors. Our products are also subject to similar state regulations.

We or our third-party manufacturers may not take the necessary steps to comply with applicable regulations, which could cause delays in the delivery of our products. In addition, failure to comply with applicable FDA requirements or later discovery of previously unknown problems with our products or manufacturing processes could result in, among other things: (i) warning letters or untitled letters; (ii) fines, injunctions or civil penalties; (iii) suspension or withdrawal of approvals or clearances; (iv) customer notifications or repair, replacement,

38

refunds, detention, seizures or recalls of our products; (v) total or partial suspension of production or distribution; (vi) administrative or judicially imposed sanctions; (vii) the FDA’s refusal to grant pending or future clearances or approvals for our products; (viii) clinical holds; (ix) refusal to permit the import or export of our products; and (x) criminal prosecution of us or our employees. Any of these actions could significantly and negatively impact supply of our products. If any of these events occurs, our reputation could be harmed, we could be exposed to product liability claims and we could lose customers and suffer reduced revenue and increased costs.

The misuse or off-label use of our products may harm our reputation in the marketplace, result in injuries that lead to product liability suits or result in costly investigations, fines or sanctions by regulatory bodies if we are deemed to have engaged in the promotion of these uses, any of which could be costly to our business.

Our currently marketed products are either Class II medical devices cleared by the FDA for specific indications or they are Class I exempt for general orthopaedic use. For example, our Lapiplasty plating system has been cleared by the FDA for use in stabilization of fresh fractures, revision procedures, joint fusion and reconstruction of small bones of the feet. We train our marketing personnel and direct sales force to not promote our devices for uses outside of the FDA-authorized indications for use, known as “off-label uses.” We cannot, however, prevent a physician from using our devices off-label, when in the physician’s independent professional medical judgment he or she deems it appropriate. There may be increased risk of injury to patients if physicians attempt to use our devices off-label. Furthermore, the use of our devices for indications other than those cleared by the FDA or approved by any foreign regulatory body (to the extent our products are cleared for use outside the United States in the future) may not effectively treat such conditions, which could harm our reputation in the marketplace among physicians and patients.

If the FDA determines that our promotional materials or training constitute promotion of an off-label use, it could request that we modify our training or promotional materials or subject us to regulatory or enforcement actions, including the issuance or imposition of an untitled letter, which is used for violators that do not necessitate a warning letter, injunction, seizure, civil fine or criminal penalties. We could face similar consequences from action by foreign regulatory bodies if we should offer our products outside the United States. It is also possible that other federal, state or foreign enforcement authorities might take action under other regulatory authority, such as false claims laws, if they consider our business activities to constitute promotion of an off-label use, which could result in significant penalties, including, but not limited to, criminal, civil and administrative penalties, damages, fines, disgorgement, exclusion from participation in government health care programs and the curtailment of our operations.

In addition, physicians may misuse our products or use improper techniques if they are not adequately trained, potentially leading to injury and an increased risk of product liability. If our devices are misused or used with improper technique, we may become subject to costly litigation by our customers or their patients. As described above, product liability claims could divert management’s attention from our core business, be expensive to defend and result in sizeable damage awards against us that may not be covered by insurance.

Our products may cause or contribute to adverse medical events or be subject to failures or malfunctions that we are required to report to the FDA, and if we fail to do so, we would be subject to sanctions that could harm our reputation, business, financial condition and results of operations. The discovery of serious safety issues with our products, or a recall of our products either voluntarily or at the direction of the FDA or another governmental authority, could have a negative impact on us.

We are subject to the FDA’s medical device reporting regulations, which require us to report to the FDA when we receive or become aware of information that reasonably suggests that one or more of our products may have caused or contributed to a death or serious injury or malfunctioned in a way that, if the malfunction were to recur, it could cause or contribute to a death or serious injury. The timing of our obligation to report is triggered by the date we become aware of the adverse event as well as the nature of the event. We may fail to report adverse events of which we become aware within the prescribed timeframe. We may also fail to recognize that

39

we have become aware of a reportable adverse event, especially if it is not reported to us as an adverse event or if it is an adverse event that is unexpected or removed in time from the use of the product. If we fail to comply with our reporting obligations, the FDA could take action, including warning letters, untitled letters, administrative actions, criminal prosecution, imposition of civil monetary penalties, revocation of our device clearance or approval, seizure of our products or delay in clearance or approval of future products.

The FDA and foreign regulatory bodies have the authority to require the recall of commercialized products in the event of material deficiencies or defects in design or manufacture of a product or in the event that a product poses an unacceptable risk to health. The FDA’s authority to require a recall must be based on a finding that there is reasonable probability that the device could cause serious injury or death. We may also choose to voluntarily recall a product if any material deficiency is found. A government-mandated or voluntary recall by us could occur as a result of an unacceptable risk to health, component failures, malfunctions, manufacturing defects, labeling or design deficiencies, packaging defects or other deficiencies or failures to comply with applicable regulations. Product defects or other errors may occur in the future.

Depending on the corrective action we take to redress a product’s deficiencies or defects, the FDA may require, or we may decide, that we will need to obtain new clearances or approvals for the device before we may market or distribute the corrected device. Seeking such clearances or approvals may delay our ability to replace the recalled devices in a timely manner. Moreover, if we do not adequately address problems associated with our devices, we may face additional regulatory enforcement action, including FDA warning letters, product seizure, injunctions, administrative penalties or civil or criminal fines.

Companies are required to maintain certain records of recalls and corrections, even if they are not reportable to the FDA. We may initiate voluntary withdrawals or corrections for our products in the future that we determine do not require notification of the FDA. If the FDA disagrees with our determinations, it could require us to report those actions as recalls and we may be subject to enforcement action. A future recall announcement could harm our reputation with customers, potentially lead to product liability claims against us and negatively affect our sales. In addition, we have had in the past, and may in the future, reports of adverse events associated with the Lapiplasty Procedure. While inherent in the medical device and surgical industry, frequent adverse events can lead to reputational harm and negatively affect our sales. Any corrective action, whether voluntary or involuntary, as well as defending ourselves in a lawsuit, will require the dedication of our time and capital, distract management from operating our business and may harm our reputation and financial results.

Disruptions at the FDA and other government agencies caused by funding shortages or global health concerns could hinder their ability to hire, retain or deploy key leadership and other personnel, or otherwise prevent new or modified products from being developed, cleared, approved or commercialized in a timely manner or at all, which could negatively impact our business.

The ability of the FDA to review and clear new products can be affected by a variety of factors, including government budget and funding levels, statutory, regulatory and policy changes, the FDA’s ability to hire and retain key personnel and accept the payment of user fees and other events that may otherwise affect the FDA’s ability to perform routine functions. Average review times at the FDA have fluctuated in recent years as a result. In addition, government funding of other government agencies that fund research and development activities is subject to the political process, which is inherently fluid and unpredictable. Disruptions at the FDA and other agencies may also slow the time necessary for medical devices or modifications to cleared medical devices to be reviewed by necessary government agencies, which would adversely affect our business. For example, over the last several years, including for 35 days beginning on December 22, 2018, the U.S. government has shut down several times and certain regulatory agencies, such as the FDA, have had to furlough critical FDA employees and stop critical activities.

Separately, in response to the COVID-19 pandemic, on March 10, 2020 the FDA announced its intention to postpone most inspections of foreign manufacturing facilities, and on March 18, 2020, the FDA temporarily

40

postponed routine surveillance inspections of domestic manufacturing facilities. Subsequently, on July 10, 2020, the FDA announced its intention to resume certain on-site inspections of domestic manufacturing facilities subject to a risk-based prioritization system. The FDA intends to use this risk-based assessment system to identify the categories of regulatory activity that can occur within a given geographic area, ranging from mission critical inspections to resumption of all regulatory activities. Regulatory authorities outside the United States may adopt similar restrictions or other policy measures in response to the COVID-19 pandemic. If a prolonged government shutdown occurs, or if global health concerns continue to prevent the FDA or other regulatory authorities from conducting their regular inspections, reviews, or other regulatory activities, it could significantly impact the ability of the FDA or other regulatory authorities to timely review and process our regulatory submissions, which could have a material adverse effect on business.

The clinical trial process is lengthy and expensive with uncertain outcomes. We have limited data and experience regarding the safety and efficacy of our products. Results of earlier studies may not be predictive of future clinical trial results, or the safety or efficacy profile for such products.

We cannot guarantee our ALIGN3D post-market clinical study, or any other clinical study we may conduct or sponsor in the future, will be successful, and such clinical trials could be lengthy and expensive to conduct. Clinical testing is difficult to design and implement, can take many years, can be expensive and carries uncertain outcomes. Clinical trials must be conducted in accordance with the laws and regulations of the FDA and other applicable regulatory authorities’ legal requirements, regulations or guidelines, and are subject to oversight by these governmental agencies and institutional review board at the medical institutions where the clinical trials are conducted. Furthermore, we rely, and in the future may continue to rely upon, on contract research organizations (CROs), and clinical trial sites to ensure the proper and timely conduct of our clinical trials and while we have agreements governing their committed activities, we have limited influence over their actual performance. To the extent our collaborators or the CROs fail to enroll participants for our clinical trials, fail to conduct the study to required good clinical practice standards or are delayed for a significant time in the execution of trials, including achieving full enrollment, we may be affected by increased costs, program delays or both.

The initiation and completion of any of clinical studies may be prevented, delayed or halted for numerous reasons, which could adversely affect the costs, timing or successful completion of our clinical trials.

In addition, disruptions caused by the COVID-19 pandemic may increase the likelihood that we encounter such difficulties or delays in initiating, enrolling, conducting or completing our planned and ongoing clinical trials. Any of these occurrences may significantly harm our business, financial condition and prospects.

Furthermore, patient enrollment in clinical trials and completion of patient follow-up depend on many factors, including the size of the patient population, the nature of the trial protocol, the proximity of patients to clinical sites, the eligibility criteria for the clinical trial, patient compliance, competing clinical trials and clinicians’ and patients’ perceptions as to the potential advantages of the product being studied in relation to other available therapies, including any new treatments that may be approved for the indications we are investigating.

Actual or perceived failures to comply with applicable data protection, privacy and security laws, regulations, standards and other requirements could adversely affect our business, results of operations and financial condition.

We and our partners may be subject to federal, state and foreign data protection laws and regulations (i.e., laws and regulations that address data privacy and security). In the United States, numerous federal and state laws and regulations, including state data breach notification laws, state health information privacy laws and federal and state consumer protection laws and regulations (e.g., Section 5 of the FTC Act), that govern the collection, use, disclosure and protection of health-related and other personal information could apply to our operations or the operations of our partners. We may also be subject to U.S. federal rules, regulations and guidance concerning data security for medical devices, including guidance from the FDA. In addition, we may

41

obtain health information from third parties (including research institutions from which we obtain clinical trial data) that are subject to privacy and security requirements under HIPAA, as amended. Depending on the facts and circumstances, we could be subject to significant penalties if we obtain, use or disclose individually identifiable health information maintained by a HIPAA-covered entity or business associate in a manner that is not authorized or permitted by HIPAA.

Certain states have also adopted comparable privacy and security laws and regulations, some of which may be more stringent than HIPAA. Such laws and regulations will be subject to interpretation by various courts and other governmental authorities, thus creating potentially complex compliance issues for us and our future customers and strategic partners. In addition, California enacted the California Consumer Privacy Act (CCPA) on June 28, 2018, which went into effect on January 1, 2020. The CCPA creates individual privacy rights for California consumers and increases the privacy and security obligations of entities handling certain personal information. The CCPA provides for civil penalties for violations, as well as a private right of action for data breaches that is expected to increase data breach litigation. The CCPA may increase our compliance costs and potential liability, and many similar laws have been proposed at the federal level and in other states. Further, the California Privacy Rights Act (CPRA), recently passed in California. The CPRA will impose additional data protection obligations on covered businesses, including additional consumer rights processes, limitations on data uses, new audit requirements for higher risk data, and opt outs for certain uses of sensitive data. It will also create a new California data protection agency authorized to issue substantive regulations and could result in increased privacy and information security enforcement. The majority of the provisions will go into effect on January 1, 2023, and additional compliance investment and potential business process changes may be required. In the event that we are subject to or affected by HIPAA, the CCPA, the CPRA or other domestic privacy and data protection laws, any liability from failure to comply with the requirements of these laws could adversely affect our financial condition.

In Europe, the European Union General Data Protection Regulation (GDPR) went into effect in May 2018 and imposes strict requirements for processing the personal data of individuals within the European Economic Area (EEA). Companies that must comply with the GDPR face increased compliance obligations and risk, including more robust regulatory enforcement of data protection requirements and potential fines for noncompliance of up to €20 million or 4% of the annual global revenues of the noncompliant company, whichever is greater. Relatedly, following the United Kingdom’s withdrawal from the EEA and the European Union, and the expiry of the transition period, companies have to comply with both the GDPR and the GDPR as incorporated into United Kingdom national law, the latter regime having the ability to separately fine up to the greater of £17.5 million or 4% of global turnover. The relationship between the United Kingdom and the European Union in relation to certain aspects of data protection law remains unclear, for example around how data can lawfully be transferred between each jurisdiction, which may expose us to further compliance risk. If we do not comply with our obligations under the GDPR, we could be exposed to the fines discussed above. In addition, we may be the subject of litigation and/or adverse publicity, which could adversely affect our business, results of operations and financial condition.

Further, the Court of Justice of the European Union ruled in July 2020 that the Privacy Shield, used by thousands of companies to transfer data between the European Union and United States, was invalid and could no longer be used. In September 2020, Switzerland concluded that the Swiss-U.S. Privacy Shield Framework does not provide an adequate level of protection for data transfers from Switzerland to the United States. Alternative transfer mechanisms may be used, including the standard contractual clauses (SCCs), while the authorities interpret the decisions and scope of the invalidated Privacy Shield, but the SCCs have also been called into question in the same ruling that invalidated Privacy Shield. At present, there are few if any viable alternatives to the SCCs, so future developments may necessitate further expenditures on local infrastructure, changes to internal business processes, or may otherwise affect or restrict sales and operations.

Although we work to comply with applicable laws, regulations and standards, our contractual obligations and other legal obligations, these requirements are evolving and may be modified, interpreted and applied in an inconsistent manner from one jurisdiction to another, and may conflict with one another or other legal obligations

42

with which we must comply. Any failure or perceived failure by us or our employees, representatives, contractors, consultants, collaborators or other third parties to comply with such requirements or adequately address privacy and security concerns, even if unfounded, could result in additional cost and liability to us, damage our reputation and adversely affect our business and results of operations.

Risks Related to This Offering and Ownership of Our Common Stock

There may not be an active trading market for our common stock, which may cause shares of our common stock to trade at a discount from the initial public offering price and make it difficult to sell the shares of common stock you purchase.

Prior to this offering, there has been no public market for our common stock. It is possible that after this offering, an active trading market will not develop or, if developed, that any market will not be sustained, which would make it difficult for you to sell your shares of common stock at an attractive price or at all. The initial public offering price per share of common stock will be determined by agreement among us and the representatives of the underwriters, and may not be indicative of the price at which shares of our common stock will trade in the public market, if any, after this offering.

The market price of our common stock may be volatile, which could result in substantial losses for investors purchasing shares in this offering.

The initial public offering price for our common stock was determined through negotiations with the underwriters. This initial public offering price may differ from the market price of our common stock after the offering. As a result, you may not be able to sell your common stock at or above the initial public offering price. Some of the factors that may cause the market price of our common stock to fluctuate include:

43

In recent years, the stock market in general, and the market for medical device companies in particular, has experienced significant price and volume fluctuations that have often been unrelated or disproportionate to changes in the operating performance of the companies whose stock is experiencing those price and volume fluctuations. Further, the stock market in general has been highly volatile due to the COVID-19 pandemic and political uncertainty in the United States. Broad market and industry factors may seriously affect the market price of our common stock, regardless of our actual operating performance. These fluctuations may be even more pronounced in the trading market for our stock shortly following this offering. Following periods of such volatility in the market price of a company’s securities, securities class action litigation has often been brought against that company. Because of the potential volatility of our stock price, we may become the target of securities litigation in the future. Securities litigation could result in substantial costs and divert management’s attention and resources from our business.

If our operating and financial performance in any given period does not meet any guidance that we provide to the public, the market price of our common stock may decline.

We may, but are not obligated to, provide public guidance on our expected operating and financial results for future periods. Any such guidance will be comprised of forward-looking statements subject to the risks and uncertainties described in this prospectus and in our other public filings and public statements. Our actual results may not always be in line with or exceed any guidance we have provided, especially in times of economic uncertainty. If, in the future, our operating or financial results for a particular period do not meet any guidance we provide or the expectations of investment analysts, or if we reduce our guidance for future periods, the market price of our common stock may decline. Even if we do issue public guidance, there can be no assurance that we will continue to do so in the future.

If securities analysts do not publish research or reports about our business or if they publish negative evaluations of our stock, the price of our stock could decline.

The trading market for our common stock will rely in part on the research and reports that industry or financial analysts publish about us or our business. We do not currently have and may never obtain research coverage by industry or financial analysts. If no or few analysts commence coverage of us, the trading price of our stock could decrease. Even if we do obtain analyst coverage, if one or more of the analysts covering our business downgrade their evaluations of our stock, the price of our stock could decline. If one or more of these analysts cease to cover our stock, we could lose visibility in the market for our stock, which in turn could cause our stock price to decline.

A significant portion of our total outstanding shares is restricted from immediate resale but may be sold into the market in the near future, which could cause the market price of our common stock to decline significantly, even if our business is doing well.

Sales of a substantial number of shares of our common stock in the public market could occur at any time. These sales, upon the expiration of the market standoff and lock-up agreements, the early release of these agreements or the perception in the market that the holders of a large number of shares of our common stock intend to sell shares, could reduce the market price of our common stock. After this offering and after giving effect to the automatic conversion of 6,845,922 outstanding shares of our Series A convertible preferred stock into shares of our common stock immediately prior to the completion of this offering, we will have 50,462,787 shares of our common stock outstanding based on 37,366,865 shares of our common stock outstanding as of December 31, 2020. Of these shares, the 9,375,000 shares we and the selling stockholders are selling in this offering may be resold in the public market immediately, unless purchased by our affiliates. The remaining 41.1 million shares, or 81.4% of our outstanding shares after this offering, are currently prohibited or otherwise restricted under securities laws, market standoff agreements entered into by our directors, officers and stockholders with us, or lock-up agreements entered into by our stockholders with the underwriters. However, subject to applicable securities law restrictions and excluding shares of restricted stock that will remain unvested, prohibitions and restrictions on the sale of these shares in the public market will be lifted beginning 180 days after the date of this prospectus. J.P. Morgan Securities

44

LLC and Morgan Stanley & Co. LLC may, in their sole discretion, release all or some portion of the shares subject to lock-up agreements at any time and for any reason. Shares issued upon the exercise of stock options outstanding under our equity incentive plans, or pursuant to future awards granted under those plans, will become available for sale in the public market to the extent permitted by the provisions of applicable vesting schedules, any applicable market standoff and lock-up agreements, and Rule 144 and Rule 701 under the Securities Act of 1933, as amended (the Securities Act). See the section titled “Shares Eligible for Future Sale” for additional information.

We also plan to register all shares of our common stock that we may issue under our equity compensation plans. Once we register these shares, they can be freely sold in the public market upon issuance and once vested, subject to volume limitations applicable to affiliates and the lock-up agreements described in the section titled “Underwriting.” If any of these additional shares are sold, or if it is perceived that they will be sold, in the public market, the market price of our common stock could decline.

We have not paid dividends in the past and do not expect to pay dividends in the future, and, as a result, any return on investment may be limited to the value of our stock.

We have never paid cash dividends and do not anticipate paying cash dividends on our common stock in the foreseeable future. The payment of dividends will depend on our earnings, capital requirements, financial condition, prospects for future earnings and other factors our board of directors may deem relevant. In addition, our term loan agreement limits our ability to, among other things, pay dividends or make other distributions or payments on account of our common stock, in each case subject to certain exceptions. If we do not pay dividends, our stock may be less valuable because a return on your investment will only occur if our stock price appreciates and you then sell our common stock. In addition, our loan agreements limit our ability to pay dividends or make other distributions or payments on account of our common stock, in each case subject to certain exceptions.

If we do raise additional capital, stockholders may be subject to dilution.

If we issue additional shares of our common stock or other equity securities convertible into common stock to fund operations, develop new products, accelerate other strategies, make acquisitions or support other activities, the ownership interests of investors in this offering will be diluted. Because our decision to issue debt or equity securities in any future offering will depend on market conditions and other factors beyond our control, we cannot predict or estimate the amount, timing or nature of any future offerings. To the extent that we raise additional capital through the sale of equity securities, your ownership interest will be diluted, and the terms may include liquidation or other preferences that adversely affect your rights as a stockholder. The incurrence of indebtedness would result in increased fixed payment obligations and could involve restrictive covenants, such as limitations on our ability to incur additional debt, limitations on our ability to acquire, sell or license intellectual property rights and other operating restrictions that could adversely impact our ability to conduct our business. Additionally, any future collaborations we enter into with third parties may provide capital in the near term but limit our potential cash flow and revenue in the future. If we raise additional funds through strategic partnerships and alliances and licensing arrangements with third parties, we may have to relinquish valuable rights to our technologies or product candidates, or grant licenses on terms unfavorable to us.

Insiders will continue to have substantial influence over us after this offering, which could limit your ability to affect the outcome of key transactions, including a change of control.

After this offering, our directors, officers, holders of more than 5% of our outstanding stock and their respective affiliates will beneficially own shares representing approximately    % of our outstanding common stock, assuming no exercise of the underwriters’ option to purchase additional shares and without giving effect to any shares that certain of these holders may make through our directed share program or otherwise. As a result, these stockholders, if they act together, will be able to influence our management and affairs and all matters requiring stockholder approval, including the election of directors and approval of significant corporate

45

transactions. This concentration of ownership may have the effect of delaying or preventing a change in control of our company and might affect the market price of our common stock.

We are an “emerging growth company” and a “smaller reporting company” and, as a result of the reduced disclosure and governance requirements applicable to emerging growth companies and smaller reporting companies, our common stock may be less attractive to investors.

We are an “emerging growth company,” as defined in the JOBS Act, and we intend to take advantage of certain exemptions from various reporting requirements that are applicable to other public companies that are not emerging growth companies, including, but not limited to, not being required to comply with the auditor attestation requirements of Section 404, reduced disclosure obligations regarding executive compensation in our periodic reports and proxy statements and exemptions from the requirements of holding a nonbinding advisory vote on executive compensation and stockholder approval of any golden parachute payments not previously approved. In addition, as an “emerging growth company” the JOBS Act allows us to delay adoption of new or revised accounting pronouncements applicable to public companies until such pronouncements are made applicable to private companies. We have elected to use this extended transition period under the JOBS Act. As a result, our financial statements may not be comparable to the financial statements of issuers who are required to comply with the effective dates for new or revised accounting standards that are applicable to public companies, which may make comparison of our financials to those of other public companies more difficult.

We cannot predict if investors will find our common stock less attractive because we will rely on these exemptions. If some investors find our common stock less attractive as a result, there may be a less active trading market for our common stock and our stock price may be more volatile. We may take advantage of these reporting exemptions until we are no longer an emerging growth company. We will remain an emerging growth company until the earlier of (i) the last day of the year following the fifth anniversary of the consummation of this offering, (ii) the last day of the year in which we have total annual gross revenue of at least $1.07 billion, (iii) the last day of the year in which we are deemed to be a “large accelerated filer” as defined in Rule 12b-2 under the Exchange Act, which would occur if the market value of our common stock held by non-affiliates exceeded $700.0 million as of the last business day of the second fiscal quarter of such year, or (iv) the date on which we have issued more than $1.0 billion in non-convertible debt securities during the prior three-year period.

Even after we no longer qualify as an “emerging growth company,” we may still qualify as a “smaller reporting company,” which would allow us to continue to take advantage of many of the same exemptions from disclosure requirements, including, among other things, not being required to comply with the auditor attestation requirements of Section 404 of the Sarbanes-Oxley Act, presenting only the two most recent fiscal years of audited financial statements in our Annual Report on Form 10-K and reduced disclosure obligations regarding executive compensation in this prospectus and our periodic reports and proxy statements.

Anti-takeover provisions in our amended and restated certificate of incorporation and bylaws, and Delaware law, could discourage a change in control of our company or a change in our management.

Our amended and restated certificate of incorporation and bylaws, as amended and restated in connection with this offering, will contain provisions that might enable our management to resist a takeover. These provisions include:

46

These provisions might discourage, delay or prevent a change in control of our company or a change in our management. The existence of these provisions could adversely affect the voting power of holders of common stock and limit the price that investors might be willing to pay in the future for shares of our common stock. In addition, because we are incorporated in Delaware, we are governed by the provisions of Section 203 of the Delaware General Corporation Law (the DGCL), which generally prohibits a Delaware corporation from engaging in any of a broad range of business combinations with any “interested” stockholder for a period of three years following the date on which the stockholder became an “interested” stockholder. See “Description of Capital Stock.”

Claims for indemnification by our directors and officers may reduce our available funds to satisfy successful third-party claims against us and may reduce the amount of money available to us.

Our amended and restated certificate of incorporation and amended and restated bylaws will provide that we will indemnify our directors and officers, in each case to the fullest extent permitted by Delaware law.

In addition, as permitted by Section 145 of the DGCL, our amended and restated bylaws to be effective immediately before to the completion of this offering and our indemnification agreements that we have entered into with our directors and officers will provide that:

47

Our amended and restated certificate of incorporation and amended and restated bylaws will provide that the Court of Chancery of the State of Delaware will be the sole and exclusive forum for substantially all disputes between us and our stockholders, which could limit our stockholders’ abilities to obtain a favorable judicial forum for disputes with us or our directors, officers or employees.

Our amended and restated certificate of incorporation and amended and restated bylaws will provide that the Court of Chancery of the State of Delaware (or, in the event that the Court of Chancery does not have jurisdiction, the federal district court for the District of Delaware or other state courts of the State of Delaware) is the exclusive forum for any derivative action or proceeding brought on our behalf, any action asserting a claim of breach of fiduciary duty, any action asserting a claim against us arising pursuant to the DGCL, our amended and restated certificate of incorporation or our amended and restated bylaws, or any action asserting a claim against us that is governed by the internal affairs doctrine; provided that, if and only if the Court of Chancery of the State of Delaware dismisses any such action for lack of subject matter jurisdiction, such action may be brought in another state or federal court sitting in the State of Delaware. Our amended and restated certificate of incorporation and amended and restated bylaws will also provide that the federal district courts of the United States of America will be the exclusive forum for the resolution of any complaint asserting a cause of action against any defendant arising under the Securities Act. Such provisions are intended to benefit and may be enforced by us, our officers and directors, employees and agents, including the underwriters and any other professional or entity who has prepared or certified any of this prospectus. The choice of forum provisions will not apply to suits brought to enforce any liability or duty created by the Exchange Act or any other claim for which the federal courts have exclusive jurisdiction.

We believe these provisions may benefit us by providing increased consistency in the application of Delaware law and federal securities laws by chancellors and judges, as applicable, particularly experienced in resolving corporate disputes, efficient administration of cases on a more expedited schedule relative to other forums and protection against the burdens of multi-forum litigation. These choice of forum provisions may limit a stockholder’s ability to bring a claim in a judicial forum that it finds favorable for disputes with us or any of our directors, officers, other employees or stockholders, which may discourage lawsuits with respect to such claims or make such lawsuits more costly for stockholders, although our stockholders will not be deemed to have waived our compliance with federal securities laws and the rules and regulations thereunder. Furthermore, the enforceability of similar choice of forum provisions in other companies’ certificates of incorporation has been challenged in legal proceedings, and it is possible that a court could find these types of provisions to be inapplicable or unenforceable. While the Delaware courts have determined that such choice of forum provisions are facially valid, a stockholder may nevertheless seek to bring a claim in a venue other than those designated in the exclusive forum provisions, and there can be no assurance that such provisions will be enforced by a court in those other jurisdictions. If a court were to find one or more of the choice of forum provisions that will be contained in our amended and restated certificate of incorporation and amended and restated bylaws to be inapplicable or unenforceable in an action, we may incur additional costs associated with resolving such action in other jurisdictions, which could seriously harm our business.

We have broad discretion to determine how to use the funds raised in this offering, and may use them in ways that may not enhance our operating results or the price of our common stock.

Our management will have broad discretion over the use of proceeds from this offering, and we could spend the proceeds from this offering in ways our stockholders may not agree with or that do not yield a favorable return, if at all. We currently expect to use the net proceeds of this offering, together with our existing cash and cash equivalents, to expand our sales force and operations, train additional physicians, develop new products, expand direct to patient education and outreach, conduct or sponsor clinical studies and trials, grow our marketing program and provide for working capital and other general corporate purposes. However, our use of

48

these proceeds may differ substantially from our current plans. If we do not invest or apply the proceeds of this offering in ways that improve our operating results, we may fail to achieve expected financial results, which could cause our stock price to decline.

New investors purchasing our common stock will experience immediate and substantial dilution.

Our initial public offering price is substantially higher than the book value per share of our common stock. If you purchase common stock in this offering, you will incur immediate dilution of $14.20 in net tangible book value per share of common stock, based on an assumed initial public offering price of $16.00 per share, which is the midpoint of the price range set forth on the cover page of this prospectus. In addition, the number of shares available for issuance under our stock option plans will increase annually without further stockholder approval. Investors will incur additional dilution upon the exercise of stock options and warrants. See “Dilution.”

General Risk Factors

Unfavorable global economic conditions could adversely affect our business, financial condition or results of operations.

Our results of operations could be adversely affected by general conditions in the global economy and in the global financial markets. Furthermore, a severe or prolonged economic downturn, including a recession or depression resulting from the current COVID-19 pandemic or political disruption could result in a variety of risks to our business, including weakened demand for our procedures or products and our ability to raise additional capital when needed on acceptable terms, if at all. A weak or declining economy or political disruption, including any international trade disputes, could also strain our manufacturers or suppliers, possibly resulting in supply disruption, or cause our customers to delay making payments for our potential products. Any of the foregoing could seriously harm our business, and we cannot anticipate all of the ways in which the political or economic climate and financial market conditions could seriously harm our business.

Our operations are vulnerable to interruption or loss due to natural or other disasters, power loss, strikes and other events beyond our control.

A major hurricane, fire or other disaster (such as a major flood, earthquake or terrorist attack) affecting our headquarters or our other facilities, or facilities of our suppliers and manufacturers, could significantly disrupt our operations, and delay or prevent product shipment or installation during the time required to repair, rebuild or replace our suppliers’ and manufacturers’ damaged facilities, which delays could be lengthy and costly. If any of our customers’ facilities are negatively impacted by a disaster, shipments of our products could be delayed. Additionally, customers may delay purchases of our products until operations return to normal. Even if we are able to quickly respond to a disaster, effects of the disaster could create some uncertainty in the operations of our business. Concerns about terrorism, the effects of a terrorist attack or political turmoil could have a negative effect on our operations, those of our suppliers and manufacturers and our customers.

We may seek to grow our business through acquisitions or investments in new or complementary businesses, products or technologies, through the licensing of products or technologies from third parties or other strategic alliances, and the failure to manage acquisitions, investments, licenses or other strategic alliances, or the failure to integrate them with our existing business, could have a material adverse effect on our operating results, dilute our stockholders’ ownership, increase our debt or cause us to incur significant expense.

Our success depends on our ability to continually enhance and broaden our product offerings in response to changing clinician and patients’ needs, competitive technologies and market pressures. Accordingly, from time to time we may consider opportunities to acquire, make investments in or license other technologies, products and businesses that may enhance our capabilities, complement our existing products and technologies or expand the

49

breadth of our markets or customer base. Potential and completed acquisitions, strategic investments, licenses and other alliances involve numerous risks, including:

We do not know if we will be able to identify acquisitions or strategic relationships we deem suitable, whether we will be able to successfully complete any such transactions on favorable terms, if at all, or whether we will be able to successfully integrate any acquired business, product or technology into our business or retain any key personnel, suppliers, sales agent, health care facilities, surgeons or other health care providers. Our ability to successfully grow through strategic transactions depends upon our ability to identify, negotiate, complete and integrate suitable target businesses, technologies or products and to obtain any necessary financing. These efforts could be expensive and time-consuming and may disrupt our ongoing business and prevent management from focusing on our operations.

If we pursue any foreign acquisitions, they typically involve unique risks in addition to those mentioned above, including those related to integration of operations across different cultures, languages and legal and regulatory environments, currency risks and the particular economic, political and regulatory risks associated with specific countries.

To finance any acquisitions, investments or strategic alliances, we may choose to issue shares of our common stock as consideration, which could dilute the ownership of our stockholders. If the price of our common stock is low or volatile, we may be unable to consummate any acquisitions, investments or strategic alliances using our common stock as consideration. Additional funds may not be available on terms that are favorable to us, or at all.

The requirements of being a public company may divert our management’s attention from our growth strategies and other business concerns.

As a public company, we will be subject to the reporting requirements of the Exchange Act and will be required to comply with the applicable requirements of the Sarbanes-Oxley Act and the Dodd- Frank Wall Street Reform and Consumer Protection Act of 2010, the listing requirements of the Nasdaq Stock Market and other applicable securities rules and regulations. Compliance with these rules and regulations will increase our legal and financial compliance costs, make some activities more difficult, time consuming or costly and increase demand on our systems and resources. Among other things, the Exchange Act requires that we file annual, quarterly and current reports with respect to our business and results of operations and maintain effective disclosure controls and procedures and internal controls over financial reporting. In order to maintain and, if

50

required, improve our disclosure controls and procedures and internal controls over financial reporting to meet this standard, significant resources and management oversight may be required. As a result, management’s attention may be diverted from executing our growth strategies and managing other business concerns and, which could have a material adverse effect on our business, financial condition and results of operations. Although we intend to hire additional employees to comply with these requirements, we may need to hire even more employees in the future, which will increase our costs and expenses. Additionally, as a public company, it will be more expensive for us to obtain director and officer liability insurance, and we may be required to accept reduced coverage or incur substantially higher costs to obtain coverage. These factors could make it more difficult for us to attract and retain qualified members of our board of directors, particularly to serve on our audit committee and compensation committee, and qualified executive officers.

We will incur significant costs as a result of operating as a public company and our executive management team expects to devote substantial time to public company compliance programs.

As a public company, we will incur significant legal, accounting and other expenses due to our compliance with regulations and disclosure obligations applicable to us, including compliance with the Sarbanes-Oxley Act, as well as rules implemented by the SEC and the Nasdaq Stock Market. Stockholder activism, the current political environment and the current high level of government intervention and regulatory reform may lead to substantial new regulations and disclosure obligations, which may lead to additional compliance costs and impact, in ways we cannot currently anticipate, the manner in which we operate our business. Our executive management team and other personnel will devote a substantial amount of time to these compliance programs and monitoring of public company reporting obligations and as a result of the new corporate governance and executive compensation related rules, regulations and guidelines prompted by the Dodd-Frank Wall Street Reform and Consumer Protection Act, and further regulations and disclosure obligations expected in the future, we will likely need to devote additional time and costs to comply with such compliance programs and rules. These rules and regulations will cause us to incur significant legal and financial compliance costs and will make some activities more time-consuming and costly.

Failure to establish and maintain an effective system of internal controls could result in material misstatements of our financial statements or cause us to fail to meet our reporting obligations or fail to prevent fraud in which case, our stockholders could lose confidence in our financial reporting and the market price of our common stock could decline.

After the closing of this offering, we will be subject to the reporting requirements of the Exchange Act, the Sarbanes-Oxley Act and the rules and regulations of the Nasdaq Stock Market. Under Section 404 of the Sarbanes-Oxley Act, we will be required to furnish a report by our management on our internal control over financial reporting beginning with our second annual report on Form 10-K. This assessment will need to include disclosure of any material weaknesses identified by our management in our internal control over financial reporting. However, our independent registered public accounting firm will not be required to attest to the effectiveness of our internal control over financial reporting until our first annual report required to be filed with the SEC following the date we are no longer an EGC. At such time as we are required to obtain auditor attestation, if we then have a material weakness, we would receive an adverse opinion regarding our internal control over financial reporting from our independent registered accounting firm. To achieve compliance with Section 404 within the prescribed period, we will be engaged in a process to document and evaluate our internal control over financial reporting, which is both costly and challenging. In this regard, we will need to continue to dedicate internal resources, including through hiring additional financial and accounting personnel, potentially engage outside consultants and adopt a detailed work plan to assess and document the adequacy of internal control over financial reporting, continue steps to improve control processes as appropriate, validate through testing that controls are functioning as documented, and implement a continuous reporting and improvement process for internal control over financial reporting. During our evaluation of our internal control, if we identify one or more material weaknesses in our internal control over financial reporting, we will be unable to assert that our internal control over financial reporting is effective.

51

We may in the future discover material weaknesses in our system of internal financial and accounting controls and procedures that could result in a misstatement of our financial statements. If we are unable to remediate future material weaknesses, or otherwise maintain effective internal control over financial reporting, we may not be able to report our financial results accurately, prevent fraud or file our periodic reports in a timely manner, which may adversely affect investor confidence in us and, as a result, our stock price and ability to access the capital markets in the future.

In addition, our internal control over financial reporting will not prevent or detect all errors and all fraud. A control system, no matter how well designed and operated, can provide only reasonable, not absolute, assurance that the control system’s objectives will be met. Because of the inherent limitations in all control systems, no evaluation of controls can provide absolute assurance that misstatements due to error or fraud will not occur or that all control issues and instances of fraud will be detected.

Furthermore, in connection with the future attestation process by our independent registered public accounting firm, we may encounter problems or delays in completing the implementation of any requested improvements and receiving a favorable attestation. If we cannot favorably assess the effectiveness of our internal control over financial reporting, or if our independent registered public accounting firm is unable to provide an unqualified attestation report on our internal controls, our stockholders could lose confidence in our reporting and the market price of our common stock could decline. In addition, we could be subject to sanctions or investigations by the Nasdaq Stock Market, the SEC or other regulatory authorities.

We are subject to U.S. anti-corruption, export control, sanctions and other trade laws and regulations (collectively, the Trade Laws). We can face serious consequences for violations.

We are subject to anti-corruption laws, including the U.S. domestic bribery statute contained in 18 U.S.C. 201, the U.S. Travel Act, and the U.S. Foreign Corrupt Practices Act of 1977, as amended. These anti-corruption laws generally prohibit companies and their employees, agents and intermediaries from authorizing, promising, offering or providing, directly or indirectly, corrupt or improper payments or anything else of value to recipients in the public or private sector. We can be held liable for the corrupt or illegal activities of our agents and intermediaries, even if we do not explicitly authorize or have actual knowledge of such activities. We are also subject to other U.S. laws and regulations governing export controls, as well as economic sanctions and embargoes on certain countries and persons.

Violations of Trade Laws can result in substantial criminal fines and civil penalties, imprisonment, the loss of trade privileges, debarment, tax reassessments, breach of contract and fraud litigation, reputational harm and other consequences. Likewise, any investigation of potential violations of Trade Laws could also have an adverse impact on our reputation, our business, results of operations and financial condition.

We, along with our suppliers, are dependent on various information technology systems, and failures of, interruptions to, or unauthorized tampering of those systems could have a material adverse effect on our business.

We and our suppliers rely extensively on information technology systems to conduct business. These systems include, but are not limited to, ordering and managing materials from suppliers, converting materials to finished products (suppliers), shipping products to customers, processing transactions, summarizing and reporting results of operations, complying with regulatory, legal or tax requirements, providing data security and other processes necessary to manage our business.

Despite the implementation of security measures, our internal computer systems and those of our contractors, consultants and collaborators are vulnerable to damage from cyberattacks, “phishing” attacks, intentional or accidental actions or omissions to act that cause vulnerabilities, computer viruses, unauthorized access, natural disasters, terrorism, war and telecommunication and electrical failures. Attacks upon information

52

technology systems are increasing in their frequency, levels of persistence, sophistication and intensity, and are being conducted by sophisticated and organized groups and individuals with a wide range of motives and expertise. As a result of the COVID-19 pandemic, we may also face increased cybersecurity risks due to our reliance on internet technology and the number of our employees who are working remotely, which may create additional opportunities for cybercriminals to exploit vulnerabilities. Furthermore, because the techniques used to obtain unauthorized access to, or to sabotage, systems change frequently and often are not recognized until launched against a target, we may be unable to anticipate these techniques or implement adequate preventative measures. We may also experience security breaches that may remain undetected for an extended period. If our systems are damaged or cease to function properly due to any number of causes, ranging from catastrophic events to power outages to security breaches, and our business continuity plans do not effectively compensate timely, we may suffer interruptions in our ability to manage operations, and would also be exposed to a risk of loss, including financial assets or litigation and potential liability, which could materially adversely affect our business, financial condition, results of operations and prospects.

We cannot assure you that any limitations of liability provisions in our contracts would be enforceable or adequate or would otherwise protect us from any liabilities or damages with respect to any particular claim relating to a security lapse or breach. While we maintain certain insurance coverage, our insurance may be insufficient or may not cover all liabilities incurred by such attacks. We also cannot be certain that our insurance coverage will be adequate for data handling or data security liabilities actually incurred, that insurance will continue to be available to us on economically reasonable terms, or at all, or that any insurer will not deny coverage as to any future claim. The successful assertion of one or more large claims against us that exceeds available insurance coverage, or the occurrence of changes in our insurance policies, including premium increases or the imposition of large deductible or co-insurance requirements, could have a material adverse effect on our business, including our financial condition, operating results and reputation.

We may be unable to obtain adequate insurance coverage.

We presently have general liability, workers’ compensation, directors’ and officers’ and product liability insurance coverage. Although we believe we will be able to maintain such coverage for a reasonable cost and obtain any additional coverages that our business may require, no assurances can be made that we will be able to do so.

Changes in tax laws or regulations that are applied adversely to us or our customers may seriously harm our business.

New income, sales, use or other tax laws, statutes, rules, regulations or ordinances could be enacted at any time, which could affect the tax treatment of any of our future domestic and foreign earnings. Any new taxes could adversely affect our domestic and international business operations, and our business and financial performance. Further, existing tax laws, statutes, rules, regulations or ordinances could be interpreted, changed, modified or applied adversely to us.

Our ability to use net operating losses to offset future taxable income may be subject to certain limitations.

Under Sections 382 and 383 of the Internal Revenue Code of 1986, as amended (Code), if a corporation undergoes an “ownership change,” generally defined as a cumulative change of more than 50 percentage points (by value) in its equity ownership by certain stockholders over a three-year period, the corporation’s ability to use its pre-change NOL carryforwards and other pre-change tax attributes (such as research tax credits) to offset its post-change income or taxes may be limited. Based upon our analysis as of December 31, 2020, we have determined that we do not expect these limitations to impair our ability to use our NOLs prior to expiration. However, if changes in our ownership occur in the future, our ability to use our NOLs may be further limited. For these reasons, we may not be able to utilize a material portion of the NOLs, even if we achieve profitability.

53

SPECIAL NOTES REGARDING FORWARD-LOOKING STATEMENTS

This prospectus contains forward-looking statements concerning our business, operations and financial performance and condition, as well as our plans, objectives and expectations for our business, operations and financial performance and condition. Any statements contained herein that are not statements of historical facts may be deemed to be forward-looking statements. In some cases, you can identify forward-looking statements by terminology such as “anticipate,” “assume,” “believe,” “contemplate,” “continue,” “could,” “due,” “estimate,” “expect,” “goal,” “intend,” “may,” “objective,” “plan,” “predict,” “potential,” “positioned,” “seek,” “should,” “target,” “will,” “would” and other similar expressions that are predictions of or indicate future events and future trends, or the negative of these terms or other comparable terminology.

These forward-looking statements include, but are not limited to, statements about:

We believe that it is important to communicate our future expectations to our investors. However, there may be events in the future that we are not able to accurately predict or control and that may cause our actual results to differ materially from the expectations we describe in our forward-looking statements. These forward-looking statements are based on management’s current expectations, estimates, forecasts and projections about our business and the industry in which we operate and management’s beliefs and assumptions and are not guarantees

54

of future performance or development and involve known and unknown risks, uncertainties and other factors that are in some cases beyond our control. As a result, any or all of our forward-looking statements in this prospectus may turn out to be inaccurate. Factors that may cause actual results to differ materially from current expectations include, among other things, those listed under “Risk Factors” and elsewhere in this prospectus. Potential investors are urged to consider these factors carefully in evaluating the forward-looking statements.

These forward-looking statements speak only as of the date of this prospectus. Except as required by law, we assume no obligation to update or revise these forward-looking statements for any reason, even if new information becomes available in the future. You should not rely upon forward-looking statements as predictions of future events. Although we believe that the expectations reflected in the forward-looking statements are reasonable, we cannot guarantee that the future results, levels of activity, performance or events and circumstances reflected in the forward-looking statements will be achieved or occur. We undertake no obligation to update publicly any forward-looking statements for any reason after the date of this prospectus to conform these statements to actual results or to changes in our expectations.

You should read this prospectus and the documents that we reference in this prospectus and have filed with the SEC as exhibits to the registration statement of which this prospectus is a part with the understanding that our actual future results, levels of activity, performance and events and circumstances may be materially different from what we expect.

55

MARKET, INDUSTRY AND OTHER DATA

This prospectus contains estimates and information concerning our industry, including market size and growth rates of the markets in which we participate, that are based on industry publications and reports. We relied on industry, market data, peer-reviewed journals, formal presentations at medical society meetings and other sources, including market studies from IBM Watson and iData Research, Inc. We also rely on our own research and estimates in this prospectus. In some cases, we do not expressly refer to the sources from which this data is derived. This information involves a number of assumptions and limitations, and you are cautioned not to give undue weight to these estimates. We have not independently verified the accuracy or completeness of the data contained in these industry publications and reports. We also rely on independent third-party sources for procedure data in the United States, as well as publicly available data.

Information that is based on estimates, forecasts, projections, market research or similar methodologies is inherently subject to uncertainties and actual events or circumstances may differ materially from events and circumstances that are assumed in this information, including those described in the section titled “Risk Factors.” These and other factors could cause results to differ materially from those expressed in these publications and reports.

56

DIVIDEND POLICY

We have never declared or paid, and do not anticipate declaring or paying, any cash dividends on our common stock. We do not anticipate paying any dividends in the foreseeable future, and we currently intend to retain all available funds and any future earnings for use in the operation of our business, to finance the growth and development of our business and for future repayment of debt. Future determinations as to the declaration and payment of dividends, if any, will be at the discretion of our board of directors and will depend on then-existing conditions, including our operating results, financial condition, contractual restrictions, capital requirements, business prospects and other factors our board of directors may deem relevant. In addition, our loan agreements limit our ability to pay dividends or make other distributions or payments on account of our common stock, in each case subject to certain exceptions.

57

USE OF PROCEEDS

We estimate that the net proceeds from the sale of 6,250,000 shares of common stock that we are selling in this offering will be approximately $90.2 million, or approximately $100.6 million if the underwriters exercise their option to purchase additional shares in full, assuming an initial public offering price of $16.00 per share, which is the midpoint of the price range set forth on the cover page of this prospectus, after deducting the estimated underwriting discounts and commissions and estimated offering expenses payable by us. We will not receive any proceeds from the sale of shares of common stock sold by the selling stockholders.

A $1.00 increase or decrease in the assumed initial public offering price of $16.00 per share, which is the midpoint of the price range set forth on the cover page of this prospectus, would increase or decrease, as applicable, the net proceeds to us from this offering by $5.8 million, assuming that the number of shares offered by us, as set forth on the cover page of this prospectus, remains the same, after deducting the estimated underwriting discounts and commissions and estimated offering expenses payable by us. Similarly, an increase or decrease of 1.0 million shares in the number of shares of common stock offered would increase or decrease, as applicable, the net proceeds to us from this offering by $14.9 million, assuming the initial public offering price remains the same, after deducting the estimated underwriting discounts and commissions and estimated offering expenses payable by us.

The principal purposes of this offering are to obtain additional capital to support our operations, establish a public market for our common stock and facilitate our future access to the public capital markets.

We currently intend to use the net proceeds from this offering, together with our existing cash and cash equivalents, to expand our sales force and operations, train additional physicians, develop new products, expand direct to patient education and outreach, conduct or sponsor clinical studies and trials, grow our marketing program and the remainder, if any, to provide for working capital and other general corporate purposes.

We may use a portion of the new net proceeds to acquire complementary products, technologies, intellectual property or businesses; however, we currently do not have any agreements to complete any such transactions and are not involved in negotiations regarding such transactions.

Based upon our current operating plan, we believe that the net proceeds from this offering, together with our existing cash and cash equivalents, will enable us to fund our operating expenses and capital expenditure requirements for at least the next 24 months from the date of this offering. This expected use of the net proceeds from this offering represents our intentions based on our current plans and business conditions, which could change in the future as our plans and business conditions evolve.

Our management will have broad discretion over the use of the net proceeds from this offering, and our investors will be relying on the judgment of our management regarding the application of the net proceeds of this offering. Due to the uncertainties inherent in the ongoing commercialization and development of the Lapiplasty System, it is difficult to estimate with certainty the exact amounts of the net proceeds from this offering that may be used for the above purposes. The amounts we actually expend in these areas, and the timing thereof, may vary significantly from our current intentions and will depend upon a number of factors, including future sales growth, success of research and product development efforts, cash generated from future operations and actual expenses to operate our business.

Pending our use of the net proceeds from this offering, we intend to invest the net proceeds in short-term, investment grade, interest bearing instruments, money market funds, certificates of deposit, commercial paper and U.S. government securities.

58

CAPITALIZATION

The following table sets forth our cash and cash equivalents and capitalization as of December 31, 2020:

You should read this table together with the section titled “Management’s Discussion and Analysis of Financial Condition and Results of Operations” and our financial statements and related notes thereto included elsewhere in this prospectus.

A $1.00 increase or decrease in the assumed initial public offering price of $16.00 per share, which is the midpoint of the price range set forth on the cover page of this prospectus, would increase or decrease, as applicable, the pro forma as adjusted amount of each of our cash and cash equivalents, additional paid-in capital, total stockholders’ equity (deficit) and total capitalization by $5.8 million, assuming that the number of shares

59

offered by us, as set forth on the cover page of this prospectus, remains the same, after deducting the estimated underwriting discounts and commissions and estimated offering expenses payable by us. Similarly, an increase or decrease of 1.0 million shares in the number of shares of common stock offered would increase or decrease, as applicable, each of our cash and cash equivalents, additional paid-in capital, total stockholders’ equity (deficit) and total capitalization by $14.9 million, assuming the initial public offering price remains the same, after deducting the estimated underwriting discounts and commissions and estimated offering expenses payable by us.

If the underwriters’ option to purchase additional shares from us is exercised in full, our pro forma as adjusted cash and cash equivalents, additional paid-in capital, total stockholders’ equity (deficit), and total capitalization as of December 31, 2020, would be $118.7 million, $122.7 million, $101.4 million, and 130.6 million, respectively.

The number of shares of common stock issued and outstanding, pro forma and pro forma as adjusted in the table above is based on 44,212,787 shares of common stock outstanding as of December 31, 2020 (assuming the automatic conversion of all of our outstanding shares of Series A convertible preferred stock as of December 31, 2020 and 158,447 shares of common stock converted from the accrued and unpaid dividends on the Series A convertible preferred stock, assuming a conversion date of April 16, 2021 as agreed between us and the requisite holders of our Series A convertible preferred stock, into an aggregate of 6,845,922 shares of our common stock prior to the completion of this offering), and excludes:

60

DILUTION

If you invest in our common stock in this offering, your interest will be diluted to the extent of the difference between the initial public offering price per share of our common stock in this offering and the pro forma as adjusted net tangible book value per share of our common stock immediately after this offering.

As of December 31, 2020, our historical net tangible book value (deficit) was $0.6 million, or $0.02 per share of common stock. Historical net tangible book value per share represents our total tangible assets (total assets less deferred offering costs) less total liabilities, less Series A convertible preferred stock, divided by the number of our shares of common stock outstanding as of December 31, 2020.

As of December 31, 2020, our pro forma net tangible book value was $0.6 million, or $0.01 per share of common stock. Pro forma net tangible book value before the issuance and sale of shares in this offering represents the amount of our total tangible assets (total assets less deferred offering costs) reduced by the amount of our total liabilities and divided by the total number of shares of our common stock outstanding as of December 31, 2020, assuming the automatic conversion of all of our outstanding shares of Series A convertible preferred stock into shares of our common stock immediately prior to the completion of this offering.

After giving further effect to the sale of 6,250,000 shares of our common stock in this offering at the assumed initial public offering price of $16.00 per share, which is the midpoint of the price range set forth on the cover page of this prospectus, after deducting estimated underwriting discounts and commissions and estimated offering expenses payable by us, our pro forma as adjusted net tangible book value as of December 31, 2020 would have been $90.9 million, or $1.80 per share. This amount represents an immediate increase in pro forma as adjusted net tangible book value of $1.79 per share to our existing stockholders and an immediate dilution of $14.20 per share to investors purchasing shares in this offering. We determine dilution by subtracting the pro forma as adjusted net tangible book value per share after this offering from the amount of cash that a new investor paid for a share of common stock.

The following table illustrates this dilution:

A $1.00 increase or decrease in the assumed initial public offering price of $16.00 per share, which is the midpoint of the price range set forth on the cover page of this prospectus, would increase or decrease, as applicable, the total consideration paid by investors purchasing shares in this offering by $5.8 million, or approximately $0.88 per share, and would decrease or increase, as applicable, dilution to investors in this offering by approximately $0.12 per share, assuming that the number of shares offered by us, as set forth on the cover page of this prospectus, remains the same, after deducting the estimated underwriting discounts and commissions and estimated offering expenses payable by us. Similarly, an increase or decrease of 1.0 million shares in the number of shares of common stock offered would increase or decrease, as applicable, the total consideration paid by investors purchasing shares in this offering by $14.9 million, or approximately $0.25 per

61

share, and would decrease or increase, as applicable, dilution to investors in this offering by approximately $0.26 per share, assuming the initial public offering price remains the same, after deducting the estimated underwriting discounts and commissions and estimated offering expenses payable by us.

Except as otherwise indicated, the above discussion and tables assume no exercise of the underwriters’ option to purchase additional shares of common stock from the selling stockholders. If the underwriters exercise their option to purchase additional shares in full, our existing stockholders would own 79.2% and our new investors would own 20.8% of the total number of shares of common stock outstanding upon the completion of this offering.

Sales by the selling stockholders in this offering will cause the number of shares held by existing stockholders to be reduced to 41.1 million shares, or 81.4% of the total number of shares of our common stock outstanding following the completion of this offering, and will increase the number of shares held by new investors to 9.4 million shares, or 18.6% of the total number of shares outstanding following the completion of this offering.

The dilution information discussed above is illustrative only and may change based on the actual initial public offering price and other terms of this offering.

The following table summarizes, as of December 31, 2020, on a pro forma as adjusted basis as described above, the difference between existing stockholders and new investors with respect to the number of shares of common stock purchased from us, the total consideration paid to us, and the average price per share paid, before deducting estimated underwriting discounts and commissions and estimated offering expenses:

The foregoing tables and calculations (other than the historical net tangible book value calculation) are based on 44,212,787 shares of common stock outstanding, (assuming the automatic conversion of all of our outstanding shares of Series A convertible preferred stock as of December 31, 2020 and 158,447 shares of common stock converted from the accrued and unpaid dividends on the Series A convertible preferred stock assuming a conversion date of April 16, 2021 as agreed between us and the requisite holders of our Series A convertible preferred stock, into an aggregate of 6,845,922 shares of our common stock prior to the completion of this offering), and excludes:

62

To the extent that any outstanding options or warrants to purchase shares of our common stock with an exercise price per share that is less than the as adjusted net tangible book value per share, before giving effect to the issuance and sale of shares in this offering, are exercised or new awards are granted under our equity compensation plans, there will be further dilution to investors participating in this offering. In addition, we may choose to raise additional capital due to market conditions or strategic considerations even if we believe we have sufficient funds for our current or future operating plans. To the extent that we raise additional capital through the sale of equity or convertible debt securities, the issuance of these securities could result in further dilution to our stockholders.

63

SELECTED FINANCIAL DATA

The following tables set forth our selected financial data for the periods and as of the dates indicated. We have derived the selected statements of operations and comprehensive loss data for the years ended December 31, 2019 and December 31, 2020 and the selected balance sheet data as of December 31, 2019 and December 31, 2020 from our audited financial statements included elsewhere in this prospectus. You should read this data together with our financial statements and related notes thereto included elsewhere in this prospectus and the information in the section titled “Management’s Discussion and Analysis of Financial Condition and Results of Operations.” The selected financial data included in this section are not intended to replace the audited financial statements and related notes thereto included elsewhere in this prospectus and are qualified in their entirety by the audited financial statements and related notes thereto included elsewhere in this prospectus. Our historical results are not necessarily indicative of our future results.

64

MANAGEMENT’S DISCUSSION AND ANALYSIS OF

FINANCIAL CONDITION AND RESULTS OF OPERATIONS

You should read the following discussion and analysis of our financial condition and results of operations together with the section titled “Selected Financial Data” and our financial statements and related notes thereto included elsewhere in this prospectus. This discussion and other parts of this prospectus contain forward-looking statements that involve risks and uncertainties, such as statements of our plans, objectives, expectations and intentions that are based on the beliefs of our management, as well as assumptions made by, and information currently available to, our management. Our actual results could differ materially from those discussed in these forward-looking statements. Factors that could cause or contribute to such differences include, but are not limited to, those discussed in the section titled “Risk Factors.” Please also see the section titled “Special Note Regarding Forward-Looking Statements.”

Overview

We are a commercial-stage orthopaedic medical device company driving a paradigm shift in the surgical treatment of Hallux Valgus (commonly known as bunions). We have pioneered our proprietary Lapiplasty 3D Bunion Correction System—a combination of novel instruments, implants and surgical methods designed to improve the inconsistent clinical outcomes of traditional approaches to bunion surgery. Although bunions are deformities typically caused by an unstable joint in the middle of the foot that leads to a three-dimensional (3D) misalignment in the foot’s anatomical structure, the majority of traditional surgical approaches focus on correcting the deformity from a two-dimensional (2D) perspective and therefore fail to address the root cause of the disorder. To effectively restore the normal anatomy of bunion patients and improve clinical outcomes, we believe addressing the root cause of the bunion is critical and have developed the Lapiplasty System to correct the deformity across all three anatomic dimensions. Our mission is to be the leader in the surgical treatment of bunions by establishing the Lapiplasty System as the standard of care.

We were formed in 2013 and since receiving 510(k) clearance for the Lapiplasty System in March 2015, we have sold more than 25,000 Lapiplasty Procedure Kits in the United States. We market and sell our Lapiplasty System to physicians, surgeons, ambulatory surgery centers and hospitals. The Lapiplasty Procedure can be performed in either hospital outpatient or ambulatory surgery centers settings, and utilizes existing, well-established reimbursement codes. We currently market and sell the Lapiplasty System through a combination of a direct employee sales force and independent sales agents across 98 territories in the United States. As of December 31, 2020, we had 34 direct sales representatives, eight regional sales vice presidents who are responsible for managing the sales representatives and 59 independent sales agents. In 2020, employee sales representatives generated approximately 35% of revenues while approximately 65% of revenues came through independent sales agents.

We currently leverage third-party manufacturing relationships to ensure low cost production while maintaining a capital efficient business model. We have no long-term supply contracts and multiple sources of supply for critical components of the Lapiplasty System. Our supply agreements do not have minimum manufacturing or purchase obligations. As such, we have no obligations to buy any given quantity of products, and our suppliers have no obligation to sell us or to manufacture for us any given quantity of our products or components for our products. In most cases, we have redundant manufacturing capabilities for each of our products. To date, we have not experienced any significant difficulty obtaining our products or components for our products necessary to meet demand, and we have only experienced limited instances where our suppliers had difficulty supplying products by the requested delivery date. We believe manufacturing capacity is sufficient to meet market demand for our products for the foreseeable future.

We have experienced considerable growth since we began commercializing our products in the United States in late 2015. The number of Lapiplasty Procedure Kits sold increased from 7,714 for 2019 to 11,113 for 2020, representing growth of 44%, despite the impact of COVID-19 on limiting the performance of elective

65

procedures in 2020. Correspondingly, our revenue increased from $39.4 million for 2019 to $57.4 million for 2020, representing growth of 46% and our net losses were $4.3 million and $3.7 million for 2019 and 2020, respectively.

Our primary sources of capital have been private placements of common stock and convertible preferred stock, debt financing agreements and revenue from the sale of our products. As of December 31, 2020, we had cash and cash equivalents of $18.1 million, an accumulated deficit of $21.4 million, $30.0 million of principal outstanding under our term loan agreement and $1.8 million in borrowings outstanding from the Paycheck Protection Program (PPP) loan program under the Coronavirus Aid Relief and Economic Recovery Act (CARES Act), which was repaid in March 2021. We believe that our existing cash and cash equivalents, available debt borrowings and expected revenues will be sufficient to meet our capital requirements and fund our operations for at least the next 12 months. Based upon our current operating plan, we believe that the net proceeds from this offering, together with our existing cash and cash equivalents, will enable us to fund our operating expenses and capital expenditure requirements for at least the next 24 months from the date of this offering.

We expect our expenses will increase for the foreseeable future, in particular as we to continue to make substantial investments in sales and marketing, and product development. Moreover, we expect to incur additional expenses as a result of operating as a public company, including legal, accounting, insurance, compliance with the rules and regulations of the SEC and those of any stock exchange on which our securities are traded, investor relations, and other administrative and professional services expenses. As a result of these and other factors, we may require or otherwise decide to incur additional financing to fund our operations and planned growth. We may seek to raise any necessary additional capital through public or private equity offerings or debt financings, credit or loan facilities or a combination of one or more of these or other funding sources.

Key Business Metric

We regularly review a number of operating and financial metrics, including the number of Lapiplasty Procedure Kits sold, the number of active surgeons using the Lapiplasty System and utilization rate, to evaluate our business, measure our performance, identify trends affecting our business, formulate our business plan and make strategic decisions.

The following table lists the number of Lapiplasty Procedure Kits sold, number of active surgeons and utilization rate in each of the three-month periods as indicated:

We believe that the number of Lapiplasty Procedure Kits sold, number of active surgeons using the Lapiplasty System and utilization rate are useful indicators of our ability to drive adoption of the Lapiplasty System and generate revenue and are helpful in tracking the progress of our business. While we believe these metrics are representative of our current business, we anticipate these metrics may be substituted for additional or different metrics as our business grows.

66

Factors Affecting Our Business

We believe that our financial performance has been and in the foreseeable future, will continue to depend on many factors, including those described below and in the section titled “Risk Factors.”

Adoption of the Lapiplasty System

The growth of our business depends on our ability to gain broader acceptance of the Lapiplasty System by successfully marketing and distributing the Lapiplasty System and ancillary products. We currently have approval at over 1,000 facilities across the United States and plan to continue to increase access by convincing even more surgeons and facility administrators that our products are superior alternatives to traditional products used in bunion surgical procedures. While surgeon adoption of the Lapiplasty Procedure remains critical to driving procedure growth, hospital and ambulatory surgery center facility approvals are necessary for both existing and future surgeon customers to access our products. To facilitate greater access to our products and drive future sales growth, we intend to continue educating hospitals and facility administrators on the differentiated benefits associated with the Lapiplasty System, supported by our robust portfolio of clinical data. If we are unable to successfully commercialize our Lapiplasty System, we may not be able to generate sufficient revenue to achieve or sustain profitability. In the near term, we expect we will continue to operate at a loss and we anticipate we will finance our operations principally through offerings of our capital stock and by incurring debt. If we are unable to raise adequate additional capital, we will be unable to maintain our commercialization efforts and our revenues could decline.

Investments in Innovation and Growth

We expect to continue to focus on long-term revenue growth through investments in our business. In sales and marketing, we are also dedicating meaningful resources to expand our sales force and management team in the United States. We are hiring additional direct sales representatives and employee field sales management to strategically access more regions with high densities of prospective patients and by focusing the efforts of our independent sales channel on our products. In research and development, our team and our Surgeon Advisory Board are continually working on next-generation innovations of the Lapiplasty System and related products. In addition to expanding our Lapiplasty offerings with products like the Lapiplasty Mini-Incision System, we are continually exploring opportunities to advance our core Lapiplasty System instrumentation and implants to further improve surgical efficiency, enhance reproducibility of outcomes and speed surgical recovery for patients. We are also pursuing the development and potential commercialization, if cleared, of new products to address ancillary surgical procedures performed routinely in connection with the Lapiplasty Procedure. Moreover, in general and administrative, we expect to continue to hire personnel and expand our infrastructure to both drive and support our anticipated growth and operations as a public company. Accordingly, in the near term, we expect these activities to increase our net losses, but in the longer term we anticipate they will positively impact our business and results of operations.

Seasonality

We have experienced and expect to continue to experience seasonality in our business, with higher sales volumes in the fourth calendar quarter, historically accounting for approximately 40% of full year revenues, and lower sales volumes in the first calendar quarter. Our sales volumes in the fourth calendar quarter tend to be higher as many patients elect to have surgery after meeting their annual deductible and having time to recover over the winter holidays. Our sales volumes in the first calendar quarter also tend to be lower as a result of adverse weather and by resetting annual patient healthcare insurance plan deductibles, both of which may cause patients to delay elective procedures. The orthopaedic industry traditionally experiences lower sales volumes in the third quarter than throughout the rest of the year as elective procedures generally decline during the summer months. Although we follow orthopaedic industry trends generally, to date our third quarter sales volumes have not been lower than other quarters, but we may experience relatively lower sales volumes during third quarters in the future.

67

Impact of COVID-19 Pandemic

In March 2020, the World Health Organization declared the outbreak of a novel coronavirus (COVID-19) as a pandemic, which continues to spread throughout the United States. In response to COVID-19, certain states within the United States implemented shelter-in-place rules requiring certain businesses not deemed “essential,” to close and requiring elective procedures to be delayed. As a result, our revenue growth was adversely impacted from March 2020 through May 2020 when such restrictions were largely eased.

There is significant uncertainty around the breadth and duration of business disruptions related to COVID-19, as well as its impact on the United States and international economies. We cannot reasonably estimate the length or severity of this pandemic, and while we experienced revenue growth during the pandemic, we have reduced our revenue growth forecasts to reflect a lower number of surgical procedures.

As a result, we shifted our priorities to: (i) reducing discretionary spending, (ii) maintaining the existing employee base and (iii) preserving liquidity. We have taken the following actions:

While we are confident in our actions to address the negative impact of COVID-19 on the business to date, there can be no assurances that these actions will be sufficient to support our business growth during the pandemic or that the pandemic will not again more negatively impact our business.

Coverage and Reimbursement

Hospitals, ambulatory surgery centers and surgeons that purchase or use our products generally rely on third-party payors to reimburse for all or part of the costs and fees associated with procedures using our products. As a result, sales of our products depend, in part, on the extent to which the procedures using our products are covered by third-party payors, including government programs such as Medicare and Medicaid, private insurance plans and managed care programs. Based on historical claims data from 2017, approximately 63% of Lapidus cases and 60% of all bunion surgical cases were paid by private payors.

Medicare payment rates to hospital outpatient departments are set under the Medicare hospital outpatient prospective payment system (OPPS), which groups clinically similar hospital outpatient procedures and services with similar costs to ambulatory payment classifications (APCs). Each APC is assigned a single lump sum payment rate, which includes payment for the primary procedure as well as any integral, ancillary, and adjunctive services. The primary CPT codes for the Lapiplasty Procedure, CPT 28297 and CPT 28740, are grouped together under APC 5114. For Lapiplasty Procedures in which fusion is performed on multiple TMT joints, CPT 28730 applies and is classified under APC 5115.

68

Components of Our Results of Operations

Revenue

We currently derive all of our revenue from the sale of our proprietary Lapiplasty System, and to a lesser extent ancillary products. The Lapiplasty System is comprised of single-use implant kits and reusable instrument trays. We sell the Lapiplasty System to physicians, surgeons, hospitals and ambulatory surgery centers in the United States through a network of independent agents and employee sales representatives. Our primary product is the Lapiplasty System, which is an instrumented, reproducible approach to 3D bunion correction that helps patients rapidly return to weight-bearing in a post-operative boot. We also offer other advanced instrumentation and implants for use in the Lapiplasty Procedure or other ancillary procedures performed in high frequency with bunion surgery. No single customer accounted for 10% or more of our revenue during the year ended December 31, 2020. We expect our revenue to increase in absolute dollars in the foreseeable future as we expand our sales territories, new accounts and trained physician base and as existing physician customers perform more Lapiplasty Procedures, though it may fluctuate from quarter to quarter due to a variety of factors, including seasonality.

Cost of Goods Sold

Cost of goods sold consists primarily of costs related to third-party manufacturing costs for the purchase of our Lapiplasty System products from third-party manufacturers. Direct costs from our third-party manufacturers includes costs for raw materials plus the markup for the assembly of the components. Cost of goods sold also includes royalties, allocated overhead for indirect labor, depreciation, rent and information technology, certain direct costs such as those incurred for shipping our products and personnel costs. We expense all inventory provisions for excess and obsolete inventories as cost of goods sold. We record adjustments to our inventory valuation for estimated excess, obsolete and non-sellable inventories based on assumptions about future demand, past usage, changes to manufacturing processes and overall market conditions. We expect our cost of goods sold to increase in absolute dollars in the foreseeable future to the extent more of our products are sold, though it may fluctuate from quarter to quarter.

Gross Profit and Gross Margin

We calculate gross profit as revenue less cost of goods sold, and gross margin as gross profit divided by revenue. Our gross margin has been and will continue to be affected by a variety of factors, primarily average selling prices, production and ordering volumes, change in mix of customers, third-party manufacturing costs and cost-reduction strategies. We expect our gross profit to increase in the foreseeable future as our revenue grows, though our gross margin may fluctuate from quarter to quarter due to changes in average selling prices as we introduce new products, and as we adopt new manufacturing processes and technologies.

Operating Expenses

Sales and Marketing

Sales and marketing expenses consist primarily of compensation for personnel, including salaries, bonuses, benefits, sales commissions and stock-based compensation, related to selling and marketing functions, physician education programs, training, travel expenses, marketing initiatives including our direct-to-patient outreach program and advertising, market research and analysis and conferences and trade shows. We expect sales and marketing expenses to continue to increase in absolute dollars in the foreseeable future as we continue to invest in our direct sales force and expand our marketing efforts, and as we continue to expand our sales and marketing infrastructure to both drive and support anticipated sales growth, though it may fluctuate from quarter to quarter.

Research and Development

Research and development (R&D) expenses consist primarily of engineering, product development, clinical studies to develop and support our products, regulatory expenses, patent costs, and other costs associated with

69

products and technologies that are in development. These expenses include compensation for personnel, including salaries, bonuses, benefits and stock-based compensation, supplies, consulting, prototyping, testing, materials, travel expenses, depreciation and an allocation of facility overhead expenses. Additionally, R&D expenses include costs associated with our clinical studies, including clinical trial design, clinical trial site initiation and study costs, data management, related travel expenses and the cost of products used for clinical trials, internal and external costs associated with our regulatory compliance and quality assurance functions and allocated overhead costs. We expect R&D expenses to continue to increase in absolute dollars in the foreseeable future as we continue to hire personnel and invest in next-generation innovations of the Lapiplasty System and related products, though it may fluctuate from quarter to quarter due to a variety of factors, including the level and timing of our new product development efforts, as well as our clinical development, clinical trial and other related activities.

General and Administrative

General and administrative expenses consist primarily of compensation for personnel, including salaries, bonuses, benefits and stock-based compensation, related to finance, information technology, legal and human resource functions, as well as professional services fees (including legal, audit and tax fees), insurance costs, general corporate expenses and allocated facilities-related expenses. We expect general and administrative expenses to continue to increase in absolute dollars in the foreseeable future as we hire personnel and our expand infrastructure to both drive and support the anticipated growth in our organization and due to additional legal, accounting, insurance, compliance with the rules and regulations of the SEC and those of any stock exchange on which our securities are traded, investor relations, and other administrative and professional services expenses associated with operating as a public company, though it may fluctuate from quarter to quarter.

Interest Income

Interest income consists of interest received on our money market funds.

Interest Expense

Interest expense consists of interest incurred and amortization of debt discount related to outstanding borrowings during the reported periods.

70

Results of Operations

For the Years Ended December 31, 2019 and 2020

The following table summarizes our results of operations for the period presented below:

Revenue. Revenue increased $18.0 million, or 45.5%, from $39.4 million in 2019 to $57.4 million in 2020. The increase in revenue was primarily due to an increased number of Lapiplasty Procedure Kits sold and an expanded customer base.

Cost of Goods Sold Gross Profit and Gross Margin. Cost of goods sold increased $4.8 million, or 63.4%, from $7.6 million in 2019 to $12.5 million in 2020. The increase in cost of goods sold was primarily due to an increase of $2.1 million in direct costs of goods sold due to our increased sales, an increase of $1.3 million in the provision for inventory obsolescence, an increase of $0.7 million in royalty expense and an increase of $0.7 million in costs of surgical instruments used during procedures. The increase in the provision for inventory obsolescence included $0.9 million of additional reserves for prior generation fixation plates that were replaced by a newer generation of fixation plates introduced to surgeon customers in fiscal year 2020, and an increase of $0.3 million in reserves for increased field inventory in 2020 compared to 2019. Gross margin decreased from 80.6% in 2019 to 78.3% for 2020 primarily due to the increased charges for inventory obsolescence and costs of surgical instruments used during procedures, and the impairment of capitalized surgical instruments, offset by reduction in direct costs per unit and sterilization costs.

Sales and Marketing Expenses. Sales and marketing expenses increased $5.9 million, or 22.8% from $25.8 million in 2019 to $31.7 million in 2020. The increase in sales and marketing expenses was primarily due to an increase of $4.8 million in professional services primarily for higher commissions from increased sales, an increase of $1.4 million in marketing expenses and an increase of $0.8 million in payroll expenses, which were partially offset by a decrease of $0.7 million in travel and entertainment expenses.

Research and Development Expenses. Research and development expenses increased $0.8 million, or 15.3%, from $5.1 million in 2019 to $5.8 million in 2020. The increase in research and development expenses was due to an increase of $0.5 million in salaries and wages as we increased headcount to continue scaling up our business and an increase of $0.1 million in clinical study expenses.

71

General and Administrative Expenses. General and administrative expenses increased $2.1 million, or 46.5%, from $4.5 million in 2019 to $6.5 million in 2020. The increase in general and administrative expenses was primarily due to an increase of $0.7 million in professional services primarily related to legal and audit expenses, an increase of $0.4 million in salaries as we increased headcount in our business, an increase of $0.4 million in general business expenses such as insurance, taxes and fees and an increase of $0.3 million in facilities expense due to the expansion of our office building.

Interest and Other Income (Expense), Net. Interest and other income (expense), net increased $(1.9) million from $0.1 million in 2019 to $(1.7) million in 2020. The year-over-year increase in other expense is primarily related to retirement of long-term debt and the resulting expense of $1.8 million of termination fees and unamortized debt discount attributable to the retired debt.

Interest Expense. Interest expense increased $1.9 million from $0.8 million in 2019 to $2.8 million in 2020. The year-over-year increase in interest expense was primarily due to an increase of $1.9 million in interest incurred on our term loans and credit facility.

Selected Quarterly Results of Operations

The following table sets forth our unaudited statements of operations and comprehensive loss data for each of the quarters presented. We have prepared the unaudited quarterly information on a basis consistent with our audited financial statements included elsewhere in this prospectus and include, in our opinion, all normal recurring adjustments necessary for the fair statement of the results of operations for the periods presented. The following quarterly financial information should be read in conjunction with our financial statements and related notes included elsewhere in this prospectus. Our historical quarterly results are not necessarily indicative of the results that may be expected in the future.

72